Study on the influence of the springback on the hole expansion ratio characterization
Journal Title: Materials Science: Materials Review - Year 2018, Vol 2, Issue 1
Abstract
Material formability has become one of the main problems, together with the springback, when stamping high added-value components for the automotive industry. The pursuit of weight reduction has led to higher strength alloys which show a lower formability. Among the different formability criteria (e.g. necking, edge strain, fracture and radius cracks) the edge strain is starting to be a critical aspect on the process planning stage. In order to characterise this criteria, the hole expansion ratio (HER) is conducted under the ISO 16630 standard. In the last years, multiple authors have analysed the HER of different alloys and its dependency on different process variables i.e. cutting method, test speed, material strength. However, the influence of the springback phenomenon on the test result has not been previously analysed. In this work, the influence of the springback on the HER values has been analysed for a mild steel DX54D and a third generation steel Fortiform1050 with a novel measuring technique. From the obtained results, it can be stated that the springback has a critical influence on the characterised HER value, mainly for the third generation steel, leading to differences of about 40% on the HER limits.
Authors and Affiliations
B. Zubia, J. Agirre, E. Saenz de Argandoña, L. Galdos, J. Mendiguren
Keywords
Related Articles
- EP ID EP679045
- DOI -
- Views 153
- Downloads 0
Assessment of the Effect of Hydrolysed Starch Graft Copolymers Application on Soil Nutrient (Phosphorus and Nitrogen) Retention
The effects of the application of the graft copolymers (Hydrolyzed starch-g-polyacrylonitrile (HSPAN) and Hydrolyzed starch-g-polyacrylic acid (HSPAA)) on the nitrogen (N) and phosphorus (P) retention capacity of soil wa...
Cooling Rate, Hardness and Microstructure of Aluminum Cast Alloys
This experiment investigated the cooling curve behavior, hardness and microstructure of two aluminum alloys produced by casting process. There are Al-1.37Zn-1.19Si and Al-1.66Si-1.35Zn derived from melting and alloying a...
Polyethylene plastic production process
Polyethylene has become the most important polyolefin plastic with excellent mechanical properties, processing properties and chemical resistance. It is used in the production of film, packaging and pipe. However, the no...
Preparation and Study of Waterborne Asphalt Pavement Maintenance Agent
The precursor Ni0.76Co0.1Mn0.1 (OH) 2 was prepared by coprecipitation method. The precursor was mixed with Mg (OH) 2 / Zn (NO3) 2 / TiO2 and LiOH.H2O, Li2CO3 to synthesize doped lithium Ion layer positive electrode mater...
Quasi-particle Contribution in Thermal Expansion and Thermal Conductivity in Metals
In this paper the modified Landau theory of Fermi Liquids was used to compute the thermal expansion and thermal conductivity of quasi-particles in metals. The result revealed that as temperature increases the thermal exp...