STUDY THE EFFECT OF SOLUTION TREATMENT ON MECHANICAL PROPERTIES OF AL-7%SI-0.3%MG ALLOY
Journal Title: Academic Research International - Year 2013, Vol 4, Issue 4
Abstract
This research includes study the effect of solutiontreatment (T6) on wear behavior of Al-Si-Mg alloy. The tested samples were solution treatment at (150,170,200 oC) for range of aging time (60, 90, 120 min.) with slidingspeed 0f (0.94 m/s) during test time of (5, 10, 15, 20 min.). The results show thatas aging time was increased ,the wear rate was decreased ,also we observed that as wear test time was increased, the wear rate was increased also, for aging temperature we found the were rate was decreased with the increasing of aging temperature.The vickers hardness number Hv was increased with increasing of aging time and aging temperature. The optimum hardness value was found at aging temperature of (200 oC) and minimum wear rate at aging temperature (120 oC), and we found at that solution treatment improved the were rate by 5% and 55% for hardness number at aging temperature 200 oC as compared with cast alloy.
Authors and Affiliations
Ammar Ammar
Keywords
Related Articles
- EP ID EP141180
- DOI -
- Views 88
- Downloads 0
WAGE DIFFERENTIAL BETWEEN PUBLIC AND PRIVATE EDUCATIONAL INSTITUTIONS: A CASE STUDY OF WAH CANTT
This study has tried to analyze the wage differential between public and private educational institutions and concludes that the public sector workers tend to have both higher average wage and education levels as com...
Coping Strategies Employed by Students to Address Stress Emanating From Socio-Economic and Academic Challenges: A Study of Nyadire Teachers’ College in Zimbabwe
The study sought to examine coping strategies employed by students at Nyadire Teachers’ College, to address stress caused by socio-economic and academic challenges. The study employed a purposive sampling technique. The...
COST, TIME AND QUALITY IMPLICATIONS IN SCHOOL ADMINISTRATION IN NIGERIA
Every economic activity has its own cost, time and quality requirement. Efficient and effective goal realization occurs through appropriate cost, time and quality management process. Therefore, cost, time and quality a...
MODEL FOR DETECTION OF GAS LOSS BY LEAKAGE FROM THE GAS STORAGE RESERVOIR
Determination of the amount of gas loss by leakage from the underground gas storage reservoir developed in an oil depleted reservoir is presented in this paper. Reservoir fluid data obtained from an...
CONTRASTIVE ANALYSIS OF PREPOSITIONAL ERRORS
This quantitative study attempts to examine the English prepositional errors exhibited in the written specimen of secondary school students of Pakistan while learning English as their second language. Error analysis is u...