Studying additional measurement errors from control tools using an integral functional method
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 3, Issue 5
Abstract
<p>Our research has established that under industrial conditions the correction to the result of current measurements when an influencing parameter deviates from the rated value is rarely introduced. In a general case, the procedure for determining an additional measurement error implies that the measured values for an influencing parameter are applied to determine the degree of its deviation while a correction to the current measurement result is calculated as the product of this degree by its rated value.</p><p>In a general case, a procedure for determining an additional measurement error includes two stages. At the first stage, the measured values for an influencing parameter are used to determine the degree of its deviation from the rated value. At the second stage, correction is calculated as the product of this degree by the rated value for an additional error.</p><p>Such a technique to calculate a correction is time consuming and insufficiently precise, as it does not take into consideration the non-linear dependence of the additional error on a change in the influencing parameter, as well as the current value for the output signal of control tool. To determine the actual value for an influencing parameter and the additional measurement error under industrial operation of control tools, an integral functional method has been proposed. The method implies determining the difference of areas under the nominal and actual acreage static characteristics, limited to a range of measurement. The difference of areas is a function of the output signal of a control tool, a measured parameter and a change in the influencing parameter. It has been shown that the proposed method makes it possible to calculate the actual values for a technological parameter based on its measured and influencing parameters only. We have established regularities between the actual value for a measured parameter, the current value for the output signal from a control tool, and the measured value for an influencing parameter. The proposed method is important and valuable in the operation of computer-integrated control systems of technological parameters, as it makes it possible to determine the actual values for a measured parameter based on relevant algorithms without calculating corrections.</p>
Authors and Affiliations
Yosyf Stentsel, Olga Porkuian, Konstiantyn Litvinov, Tetiana Sotnikova
Keywords
Related Articles
- EP ID EP666409
- DOI 10.15587/1729-4061.2019.171445
- Views 53
- Downloads 0
Determining strength indicators for the bearing structure of a covered wagon's body made from round pipes when transported by a railroad ferry
Improving the efficiency of transportation process through international transport corridors promotes the development of interoperable systems. Successful functioning of the interoperability of transportation is possible...
Design and study of equipment for accepting and drying soya seeds with high moisture content
<p>The studied designs of existing equipment for post-harvest processing do not ensure careful reception and drying of high-moisture soya seeds which leads to a decrease in quality and yield loss. To solve this problem,...
Theoretical study into efficiency of the improved longitudinal profile of frogs at railroad switches
<p>We have developed a comprehensive method to prolong the time of operation of frogs at railroad switches, based on the consideration of a longitudinal profile of the frog, the magnitude of dynamic forces and normal str...
Development of a genetic algorithm for placing power supply sources in a distributed electric network
<p>The problem of substantiation of developing complex distribution systems of electric power supply was considered as a hierarchy of problems at the first stage of which the problem of choosing a rational configuration...
Studying the influence of design and operation mode parameters on efficiency of the systems of biochemical purification of emissions
<p>A procedure for evaluating efficiency of the systems of biological elimination of soluble and insoluble in water harmful gaseous substances as well as dissolved in water contaminants has been devised. The procedure is...