Studying the heating geometry with integration of computer-integrated modeling technologies
Journal Title: Інформаційні системи, механіка та керування - Year 2018, Vol 0, Issue 18
Abstract
The experience of the world economy confirms that the rational use of fuel resources is the key to the sustainable economy development and indicates the proper progress level of positive processes in the country. One of the important issues of the energy policy of Ukraine is the economical use of energy resources. One of the main parameters of the comfort ensuring in the production room microclimate is the temperature of the air, therefore, the achievement of the uniformity of its distribution is paid special attention during the study. An effective way to ensure the temperature regime in the production room is the use of infra-red heaters. At the same time, it is important to consider complex heating and ventilation systems in order to ensure the regulatory parameters of the microclimate. The presented studies concerned the determination of such factors influence as the speed of air flow, the power of the infra-red heater, the degree of blackness of the enclosing structures, etc. on the temperature regime in the working area of the production room. The study of the geometry of heat distribution was carried out with the help of the latest computer-integrated simulation technologies. The results of scientific research can be used at the stage of designing buildings and structures of industrial purpose using energy saving systems, which include the radiation component of infrared heating.
Authors and Affiliations
Elena Nikolaevna Gumen, Irina Borisovna Selina
Keywords
Related Articles
- EP ID EP465537
- DOI -
- Views 61
- Downloads 0
PROBLEMS AND WAYS OF UNIFYING OF INFORMATION ABOUT RESTRICTION ZONES FOR THEIR REGISTRATION IN LAND AND URBAN CADASTER
The basis of the registration process for restrictions and encumbrances of land is the concept of joint integration of geospatial data from different types of urban planning and land documents. According to current legis...
Ensuring the stability and control of the aircraft at critical angles of attack
The aim of this paper is to study the effect of different combinations of structural funds management boundary layer of air on the aerodynamic characteristics of the aircraft, the development of guidelines for the select...
ОЦІНКА НЕВИЗНАЧЕНОСТІ ПРИ КАЛІБРУВАННІ ГЕНЕРАТОРІВ ФАЗИ НА ДЕРЖАВНОМУ ПЕРВИННОМУ ЕТАЛОНІ КУТА ЗСУВУ ФАЗ МІЖ ДВОМА НАПРУГАМИ В ОСНОВНОМУ ДІАПАЗОНІ ЧАСТОТ
<p>Представлені матеріали щодо оцінки невизначеності при калібруванні генераторів фази на Державному первинному еталоні кута зсуву фаз між двома напругами в основному діапазоні частот.</p>
RESEARCH AND DEVELOPMENT OF NUMBERS RECOGNITION SYSTEM ON THE BASIS OF FUZZY LOGIC IN LabVIEW
A large amount of data are input into the computer. These data can be presented as visual images, sounds (speech), electronic signals, etc. And there is a problem with their recognition. Recognition of graphic symbol, in...
ОСОБЛИВОСТІ УЗАГАЛЬНЕНОГО ПАРАМЕТРИЧНОГО РЕЗОНАНСУ ДЛЯ РЕЗЕРВУАРА ГИПЕРБОЛОЇДАЛЬНОЇ ФОРМИ
The problem of the development of liquid parametric fluctuations with a free surface in a two-cavity hyperboloid tank moving vertically under the action of a force that varies according to a given harmonic law with the...