Studying Transient State Using State Parameters
Journal Title: Acta Marisiensis. Seria Technologica - Year 2017, Vol 14, Issue 1
Abstract
This paper presents the state variables method in the analysis of the transient state. Using this method the behaviour of transformers at on/off switching is studied. The transient state is a short event caused by any changes in the system which is followed by an energy modification stored in the system. The energy is stored in capacitors and coils and any modification needs time and has reactions. These reactions can be high impulses of energy which propagate through the network and influence or even destroy other circuit elements or devices. The transient state of an RLC circuit and of a transformer is studied. Differential equations are used and the nonlinearity of the coil is highlighted. Differential equations and the equivalent circuit are used to deduce the state parameter model for the transformer. Equations and equivalent circuit for a real transformer are deduced with and without load at the output. The behaviour of the transformer was studied while functioning in an open circuit and with different loads at the output. To study the output parameter variations state space model simulation was used
Authors and Affiliations
Katalin ÁGOSTON
Keywords
Related Articles
- EP ID EP294222
- DOI -
- Views 126
- Downloads 0
Distribution Network Reconfiguration for Power Loss Minimization and Voltage Profile Enhancement Using Ant Lion Algorithm
Distribution networks are designed as a ring and operated as a radial form. Therefore, the reconfiguration is a simple and cost-effective way to use existing facilities without the need for any new equipment in distribut...
Optimal Charging of Electrical Vehicles in the Smart City for Loss Minimization and Voltage Improvement
The world is two-thirds of the way through a century-long cycle of rapid urbanisation, at the end of which more than 70% of people will live in cities (World Health Organization, 2014). The urban transformation has becom...
Experimental Model for a Brake Test Stand
A brake test stand is a mechanical system that simulates a driveway in order to test the efficiency of the braking system of an auto vehicle. It hosts a range of sensors and transmitters which measure the braking forces...
Novel Hierarchical Micro/Nano Modified Surfaces for Dental Implants
Present paper presents the modification at nano scale level of the surfaces of Ti6Al4V alloy that were previously modified at micro scale level by acid etching (AE) or by sand blasting with large grit and acid etching (S...
Data Processing for Brake Test Stands
Processing data generated by a mechanical system (e.g. force, speed, pressure, etc.) requires an interdisciplinary approach that includes mechanics, electronics, and software. The data is collected from a mechanical syst...