Five Phase Pentagon Hybrid Stepper Motor Intelligent Half / Full Driver
Journal Title: Acta Marisiensis. Seria Technologica - Year 2017, Vol 14, Issue 1
Abstract
Stepper motors are very well suited for positioning applications since they can achieve very good positional accuracy without complicated feedback loops associated with servo systems. In this paper, an intelligent five-phase stepper motor driver of business card size proposed. Constant current chopping technique was applied for the purposes of high torque, high velocity and high efficiency. The driver was designed to drive a middle-sized hybrid stepper motor with wire current rating from 0.4 to 1.5A. An up-to-dated translator of five-phase stepping motor was used to drive the gates of N- channel MOSFET array. The resolution in full/half mode is 0.72/0.36 degrees/step. Moreover, an automatic power down circuit was used to limit the power consuming as the motor stops. Additionally, a self-testing program embedded in a 80C31-CPU (PCL838) can self-test whether the driver is normal or not. This embedded program including linear acceleration and deceleration routines also can serve as a positioning controller. The dimension of this driver is approximate 70x65x35 millimeters, which is smaller than a business card. Experimental results demonstrate that the responses of the driver can reach 60 kilo pulses per second
Authors and Affiliations
Alexandru MORAR
Keywords
Related Articles
- EP ID EP288890
- DOI -
- Views 165
- Downloads 0
Data Processing for Brake Test Stands
Processing data generated by a mechanical system (e.g. force, speed, pressure, etc.) requires an interdisciplinary approach that includes mechanics, electronics, and software. The data is collected from a mechanical syst...
Data Acquisition and Control Simulation
The aim of this paper is to build a master application that controls a brake test system. One crucial step is developing a data acquisition and control system, capable of simulating the real physical stand. The simulator...
Digital Solution for Fast Evaluation of the Power Factor in Power Networks
Power quality evaluation involves measurements and determinations of some power quality indicators. One of these indicators is represented by the power factor. The importance of the power factor as an indicator of power...
Studying Transient State Using State Parameters
This paper presents the state variables method in the analysis of the transient state. Using this method the behaviour of transformers at on/off switching is studied. The transient state is a short event caused by any ch...
Mathematic Modeling of Experimental Results on the Influence of Some Factors on Rape Production (Brassica Napus)
This article discusses the nonlinear regression model, the method of the smallest squares with examples, and it includes calculations for the quadratic function model. We used data obtained from a study which analyzed th...