Substantiation of choosing the design of a reactordust collector with two colliding flows
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 3, Issue 10
Abstract
<p>The objects of this study are the dust collectors for dry gas purification ‒ devices in which hydrodynamic modes are implemented. Advantages of using such devices are: work with gases of high temperature, high degree of purification; regulation of a process of gas purification from dust due to regulation of secondary air consumption. There are no improvements for the theory of operation of apparatuses for the dry purification of a gas flow from dust. It does not provide an opportunity for a reasonable choice of the design of an apparatus and its main characteristics. We consider a design of a dust collector for dry purification of a gas flow, in which a degree of purification of a gas flow from dust reaches 97‒98.5 %, regardless of the particle size of a dispersed phase. This fact is a necessary condition for modern industry. We proposed the design of a heterogeneous reactor for a gas-solid system with two colliding flows. We determined specific features of hydrodynamics of a reactor, distribution of stay time in a reactor, and proposed a model of a reactor based on discrete Markov processes. We established experimentally that a degree of purification of a gas-dispersed flow from dust in the proposed reactor can reach 98 %. This is possible because of formation of agglomerates due to intensive interaction between particles that are larger than the particle size at the reactor inlet 3‒4 times. We proved that, compared to a suspended layer and hydrodynamic conditions in cyclones and vortex chambers, the proposed reactor has an advantage in terms of energy consumption for overcoming of resistance. This is due to the fact that in these devices spend a large proportion of energy for maintenance of particles in a suspended state, and also for pumping air through internal devices. During operation of the proposed gas-purifying dust collector, we achieved qualitative indicators, which confirm the expediency of the conducted studies and the expediency of choosing a device for dry purification of a gas flow.</p>
Authors and Affiliations
Inna Pitak, Valery Shaporev, Oleg Pitak, Nataliia Ponomarova
Keywords
Related Articles
- EP ID EP528023
- DOI 10.15587/1729-4061.2018.133324
- Views 64
- Downloads 0
Development of energy-saving technology for maintaining the functioning of heat pump power supply
<p class="a">An integrated system of maintaining functioning of heat pump power supply based on prediction of a change of local water temperature was developed. A change in refrigerant vapor flow rate, the number of rota...
Study into predicted efficiency of the application of hybrid solar collectors to supply energy to multi-apartment buildings
<p>This paper reports a study into efficiency of the application of hybrid solar collectors, which can simultaneously generate both electricity and thermal energy to supply power to multi-storey buildings. The novelty of...
Analytical identification of the unmanned aerial vehicles' surfaces for the implementation at a 3D printer
<p>Based on the R-functions theory, new approaches to analytical identification of drone surfaces for realization of 3D printing technology have been developed.</p><p>The R-functions theory allows one to describe geometr...
Results of experimental researches into process of oak veneer drying in the solar dryer
<p>A new design of solar drying plant with the active solar energy system is developed. It is proposed to use the K1-102 automated control system to diagnose the key parameters of air exchange in the solar dryer and to p...
Development of a method for optimizing operation of centrifugal gas superchargers under conditions of uncertainty
<p>A problem of development of a method of optimal control of operation of natural gas superchargers by a criterion which both minimizes fuel gas consumption and takes into account power of nitrogen oxide emissions into...