Results of experimental researches into process of oak veneer drying in the solar dryer
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 2, Issue 8
Abstract
<p>A new design of solar drying plant with the active solar energy system is developed. It is proposed to use the K1-102 automated control system to diagnose the key parameters of air exchange in the solar dryer and to predict the intensity of heat exchange processes of oak veneer drying. This allows increasing the technological and power efficiency of the process of oak veneer drying in the solar dryer 2 times.</p><p>The regularities of the influence of the physical parameters of the environment and weather-dependent factors on the heat, mass, and moisture exchange processes of oak veneer drying in the solar dryer are determined. Estimation of energy, kinetic and dynamic parameters of the oak veneer drying process is given. The duration of the drying process in the solar dryer is experimentally determined. Performance characteristics of the drying object are investigated, depending on the set technological tasks (heating or drying) under standard insolation and meteorological conditions.</p><p>It is found that it is necessary to regulate air exchange, moisture release, rational moist coolant removal, solar energy flow in relation to the predicted changes in the minimum and maximum variation peaks of weather-dependent factors. This is important for intensifying the oak veneer drying processes and reducing the specific power consumption of the drying process due to solar energy.</p>The obtained results can be used in the development and improvement of technical means of oak veneer drying, to improve the technological and power efficiency of the process
Authors and Affiliations
Mykhailo Babych, Roman Krygul, Stepan Shapoval, Nataliya Tolstushko, Sergiy Korobka, Mykola Tolstushko
Keywords
Related Articles
- EP ID EP666333
- DOI 10.15587/1729-4061.2019.162948
- Views 90
- Downloads 0
Mathematical model of the reverse water postpurification at mining enterprises when using electromagnetic focusing of contaminants
This study addresses the post-purification of reverse water by the electromagnetic focusing of charged particles in contaminants of polychlorinated biphenyls at mining enterprises. We established functional dependences o...
Effect of blanching and treatment with a salt solution on the biological value of broccoli
<p class="a">We studied and analyzed the components of the biological value of broccoli, the variety of Parthenon, cultivated in the regions of Ukraine. The research results are reported, the changes in the content of as...
Investigation of the combination of ITO/CdS/CdTe/Cu/Au solar cells in microassembly for electrical supply of field cables
<p>Studies aimed at optimizing the design of micromodules based on ITO/CdS/CdTe/Cu/Au photoelectric converters, which are used in autonomous power plants for field camps, have been carried out. To use photoelectric conve...
Change in the physicalmechanical and decorative properties of labradorite under thermal exposure
<p>We have experimentally investigated samples from the four fields of coarse-grained labradorite, which is extracted in Ukraine. The samples of labradorite were tested at high temperatures of 200, 300, 400, 500, 600, 70...
Research of the treatment of depleted nickelplating electrolytes by the ferritization method
<p>Considerable attention has been paid recently to the development of comprehensive recycling of industrial wastewater, which provides for an appropriate degree of purification for both organization of circulation water...