Surface Finishing using Extrusion Honing Process on Monel- 400
Journal Title: International Journal of engineering Research and Applications - Year 2017, Vol 7, Issue 12
Abstract
Extrusion Honing (EH) also known as Abrasive flow machining (AFM) is a unconventional machining process which is used to deburr, radius, polish and remove recast layer of components in a wide range of applications by flowing pressurized semisolid abrasive laden visco-elastic media over those surfaces of Monel- 400. . In the present study Monel- 400 has been extrude honed in an indigenously built hydraulic operated extrusion honing setup using a select grade of polymer as a carrier medium and SiC abrasives of 54 Mesh size. The internal surface finish results are evaluated in terms of surface finish parameters (Ra , Rz , Rt , Rpk) for 7, 8, 9, 10 mm hole diameters. The results showed that surface parameters and material removal were mainly influenced by abrasive concentration and abrasive Mesh size.
Authors and Affiliations
K N Lingaraju, H P Raju
Keywords
Related Articles
- EP ID EP393018
- DOI 10.9790/9622-0712045256.
- Views 92
- Downloads 0
Review Paper on Soil Stabilization by Terrazyme
During construction work soil stability is one of the major problems. Due to lack of strength possessed by soil, it fails to bear the loads imposed on it during or after the construction. The process involved in soil sta...
A Close-Up View About Spark in Big Data Jurisdiction
The Big data is the name used ubiquitously now a day in distributed paradigm on the web. As the name point out it is the collection of sets of very large amounts of data in pet bytes, Exabyte etc. related systems as well...
A Mathematical model for Impact of citalopram on the HPA system and combined DEX/CRH test in 30 unipolar depressed patients.
In this paper we introduce bivariate sinh-normal distribution, which has seven parameters. Due to presence of seven parameters it is a very flexible distribution .Different properties of this new distribution has been es...
Broad band dielectric spectroscopy studies on associative and nonassociative binary mixtures
In this present study, the dielectric relaxation and thermodynamic behavior of pure and binary mixtures of Triethylene glycol and ethyl benzoate and their binary mixtures ofeleven concentrations were investigated. The va...
Laboratory Determination of the Effects of Microorganisms on the Rheological Properties of Niger Delta Clays
The inexorable role of drilling muds in the petroleum industry has prompted the necessity to evaluate cost effective and highly efficient locally sourced additives. It is known that clay mineralogical composition and mud...