SURFACE ROUGHNESS VARIATION IN BALL END MILLING OF C45 MATERIAL. PART I: INCLINATION OF TOOL AXIS IN FEED POSITIVE DIRECTION
Journal Title: TEHNOMUS - Year 2012, Vol 19, Issue 1
Abstract
This paper primarily presents important experimental results, about surface roughness variation in ball end milling, for the case of tool axis inclination in feed positive direction. Secondary, using experimental results an mathematical model was proposed in order to estimate the surface roughness for different values of tool axis inclination. Because the surface roughness is a good indicator for process performance, it is important to identify the optimum conditions in order to obtain good results with low cost. In this paper the influence of inlination angle and speendle speed value upon surface roughness was investigate. The final purpose of this study is to develop an prediction function of surface roughness in ball end milling for the case of inclination in feed positive direction.
Authors and Affiliations
Mircea LOBONŢIU, Ioan PAȘCA
Keywords
Related Articles
- EP ID EP161411
- DOI -
- Views 80
- Downloads 0
SOURCES OF POLLUTION IN SIDERURGY AND TECHNIQUES FOR REDUCING NOXIOUS EMISSIONS
The systematic identification of the various sources of pollution creates the necessary background for organizing actions in order to prevent and fight against pollution. The diversity of the sources and forms of polluti...
STUDY FOR THE VARIATION OF HARDNESS AND RESILIENCE CHARACTERISTICS AFTER HEAT TREATMENT FOR STAINLESS STEELS
The paper presents tests of the stainless steel. This material was subjected to heat treatments, afterwards conducted impact bend tests and hardness measurements. Using the data was drawn graphic variation of hardness an...
MONTE CARLO PIVOTAL CONFIDENCE BOUNDS FOR WEIBULL ANALYSIS, WITH IMPLEMENTATIONS IN R
To gain expert insight in the inner workings and pitfalls ofcommercial lifetime analysis software, the authors created an open source alternative with asubset of analysis tools and made it freely available as a package f...
APPLICATIONS OF FULL FACTORIAL DESIGN EXPERIMENTS FOR LASER WELDING
Laser welding using Nd: YAG laser with continuous emission is applied for a low alloyed steel. The study pursued molten areas characteristics in the material. On the weld cross section was measured weld width, weld depth...
DETERMINATION OF THE EFFORTS THAT OCCUR IN THE CASE OF PERFORMING INNER THREADS WITH FORMING ROLLERS
The aim of this paper is to present a simplified model for the theoretical calculation of the deformation efforts that occur in the case of performing inner threads by forming rollers. Firstly, determination of the norma...