Survey of electrocoagulation process Performance (with iron-rod electrode) in treatment of drinking water- case study: Kermanshah Soleymanshah dam
Journal Title: International Research Journal of Applied and Basic Sciences - Year 2015, Vol 9, Issue 8
Abstract
In this study has been investigated electrocoagulation process with Fe electrode in batch mode for treatment of surface water. The design of experiment runs were carried out using a central composite design (CCD). After each run the effects of significant variables on the removal efficiency of study parameters were analyzed with RSM model and measured the value of metal dissolving in effect of anode electrode dissolution with inductively coupled plasma. The results showed that electrocoagulation process is an effective method in the removal of study parameters from surface waters but the concentration of metal dissolving in effect of anode electrode dissolution has health importance, therefore, the optimal experiments condition was selected as regard to standard concentration of metal dissolving. At the optimum conditions, removal efficiency of study parameters were obtained manganese 65%, heterotrophic bacteria 60.7%, total coliform 80% and reduced total hardness 24 mg/L, alkalinity 17mg/L.
Authors and Affiliations
Jamshid Derayat| Department of Environmental Health Engineering, School of Public Health, Kermanshah University of Medical Sciences, Kermanshah, Iran, Zeinab Jafari Motlagh| Social Development & Health Promotion Research Center, Kermanshah University of Medical Sciences, Kermanshah, Iran, Meghdad Pirsaheb *| Department of Environmental Health Engineering, School of Public Health, Kermanshah University of Medical Sciences, Kermanshah, Iran, email: mpirsaheb@yahoo.com, Kiomars sharafi| Department of Environmental Health Engineering, School of Public Health, Kermanshah University of Medical Sciences, Kermanshah, Iran, PhD Student of Environmental Health Engineering Department, Tehran University of Medical Sciences, Tehran, Iran, Reza Jafari Motlagh| Department of Chemistry, Institute for Advanced Studies in Basic Sciences (IASBS), Zanjan, Iran
Keywords
Related Articles
- EP ID EP7108
- DOI -
- Views 344
- Downloads 22
Crack Identification in Blades
In this paper a method for crack detection in blades is presented. In the suggested method, the process of crack identification is consists of four stages. In first stage, three natural frequencies of a blade for differe...
STUDY OF SOIL PHOSPHORUS AVAILABILITY AFFECTED BY DIFFERENT AMOUNTS OF PHOSPHORUS FERTILIZERS
The goal of this research was the investigation of relationship between added phosphorus to soil and the increase of dissolved and absorbable phosphorus and its effect on absorbable Fe and Fe concentration in soils under...
Optimization of Combine Harvesting, Threshing, and Separating Systems for Reducing Corn Loss
Harvesting corn with a combine harvester leads to a certain degree of loss and thus reduces profits; although this loss cannot be fully eliminated, it can be controlled to areasonable degree. Preparing the combine for ha...
INTRODUCING AN OPTIMIZED PATTERN OF URBAN STRUCTURE VIA FUZZY GERT NETWORKS
In this paper, a coherent infrastructural pattern is codified in association with the fuzzy and flexible management point of view for urban project tasks using GERT network techniques. In this pattern, the value of each...
Non-Retroactive Challenges of the Criminal Law in the Procedure of International Criminal Court
The principle of non-retroactivity rule is foundation of the law. So that this principle in the private law, public law and criminal law, even in international documents has a particular importance as a means of proving...