Switching Control Strategy for Greenhouse Temperature-Humidity System Based on Prediction Modeling: A Simulation Study
Journal Title: Journal of Engineering and Technological Sciences - Year 2017, Vol 49, Issue 5
Abstract
It is difficult to achieve coordination control of multiple facilities that are driven by on-off actuators in a greenhouse, especially when there is more than one indoor environmental factor to consider at the same time. With the consideration of indoor air temperature and relative humidity, we propose a switching control strategy based on prediction modeling. The operation of the greenhouse system was divided into several modes according to the on-off control characteristics of the available facilities. Then, a switching diagram was designed according to the relationship between the indoor air temperature and humidity and their setting ranges. When the two indoor environmental factors reach their upper or lower limits, IARX models are used to predict them over a specified horizon for each optional mode respectively. Mode switching is carried out based on prediction results. The switching control strategy was simulated based on a mechanistic model of the greenhouse microclimate. The results show that the facilities can be coordinated very well by the proposed control strategy and it is easy to implement. The control strategy is still applicative when more facilities or more indoor environmental factors need to be taken into account
Authors and Affiliations
Zhenfeng Xu, Junjie Chen
Development of Nationwide Vs30 Map and Calibrated Conversion Table for Indonesia using Automated Topographical Classification
A nationwide Vs30 map for Indonesia was developed based on automated topographic classification from 90-m grid digital elevation data and their correlation with Vs30. Automated topographic classification has been propose...
Cu(II) Ion Adsorption Using Activated Carbon Prepared from Pithecellobium Jiringa (Jengkol) Shells with Ultrasonic Assistance: Isotherm, Kinetic and Thermodynamic Studies
Adsorption of Cu(II) ions from aqueous solution onto activated carbon (AC) prepared from Pithecellobium jiringa shell (PJS) waste was investigated by conducting batch mode adsorption experiments. The activation with ultr...
Study of Micro-hardness of High-Speed W9Mo4Co8 Steel Plates in Pendulum Grinding by Abrasive Wheel Periphery
In cutting tool assembly, grinding is the most important technological step of the finishing treatment, largely determining the workmanship. An increase of micro-hardness after grinding relative to the original one indic...
Improving Gold Recovery from Artificial Preg-Robbing Ore by Pre-treatment using Blinding Agent and Resin-in-Leach
In the present paper, the effectiveness of the use of blinding agents, ionic exchanger resins and the combination of them in improving gold extraction from simulated preg-robbing ore is discussed. The blinding agents use...
Development of Composite Adsorbent Coating Based Acrylic Polymer/Bentonite for Methylene Blue Removal
The development of composite adsorbent coating based acrylic polymer solution (APS) mixed with bentonite (ben) was investigated. The composite adsorbent coating was prepared and coated to a high surface area substrate, c...