Treatment Optimization of Electrocoagulation (EC) in Purifying Palm Oil Mill Effluents (POMEs)
Journal Title: Journal of Engineering and Technological Sciences - Year 2017, Vol 49, Issue 5
Abstract
Palm oil mill effluents (POMEs) can contaminate soil, groundwater, and also the water environment. The increasing production of crude palm oil in Indonesia produces an enormous amount of POME waste. Therefore, a method is needed that can be used to purify POMEs. In this paper, an electrocoagulation (EC) method for purification of wastewater and a design to optimize this method are presented. An optimization experiment was performed by varying voltage and process time. The applied voltages were 6, 9, and 12 V and the process time was varied between 30 and 150 minutes. The measured parameters were: COD, BOD5, pH, TSS, lipids, and NH3-N. The result shows that optimum conditions were achieved at a voltage of 12 V and a process time of 150 minutes with COD at 8000 mg/L, BOD5¬ at 12000 mg/L, pH at 7.46, TSS at 324 mg/L, lipids at 17.8 mg/L, and NH3-N at 0.65 mg/L. The results are in accordance with environmental quality standards for pure water. This study proves that the proposed EC method is effective in purifying POMEs from pollutants.
Authors and Affiliations
Rusdianasari Rusdianasari
Keywords
Related Articles
- EP ID EP324176
- DOI 10.5614/j.eng.technol.sci.2017.49.5.4
- Views 90
- Downloads 0
A Comprehensive Comparison Study of Empirical Cutting Transport Models in Inclined and Horizontal Wells
In deviated and horizontal drilling, hole-cleaning issues are a common and complex problem. This study explored the effect of various parameters in drilling operations and how they affect the flow rate required for effec...
Preliminary Study on Treatment of Palm Oil Mill Effluent by Sand Filtration-Dielectric Barrier Discharge System
In the palm oil industry, open ponding, aerobic and anaerobic digestion, physicochemical treatment and membrane filtration are generally applied as conventional treatments of palm oil mill effluent (POME). In this study,...
Three-Dimensional Gravity Inverse Modeling for Basement Depth Estimation Integrating Maximum Difference Reduction (MDR), Trend Surface Analysis (TSA) and Total Variation Regularization
In sedimentary basin studies, gravity data are typically used to estimate the basement topography. Gravity inversion methods are expected to be able to discriminate between continuous and discontinuous sedimentary basins...
Evaluation of the Fate of Nitrate and Analysis of Shallow Soil Water using Geo-electrical Resistivity Survey
Evaluation of the fate of nitrate and analysis of shallow soil water in a tobacco plantation area were conducted using integration of soil properties and hydrogeochemical analysis, and geo-electrical resistivity methods,...
Hydraulic Fracturing Mechanism in Reservoirs with a Linear Inclusion Fissure
Hydraulic fracturing technology is widely used in most oil-water wells to improve production. However, the mechanism of fracturing in a reservoir with inclusion fissures is still unclear. In this study, a theoretical mod...