Hydraulic Fracturing Mechanism in Reservoirs with a Linear Inclusion Fissure
Journal Title: Journal of Engineering and Technological Sciences - Year 2016, Vol 48, Issue 2
Abstract
Hydraulic fracturing technology is widely used in most oil-water wells to improve production. However, the mechanism of fracturing in a reservoir with inclusion fissures is still unclear. In this study, a theoretical model was developed to determine the stress distribution during hydraulic fracturing. The line inclusion fissure was regarded as a thin bar and the stress around the artificial fracture, which is affected by a single line inclusion, was determined using the Eshelby equivalent inclusion theory. Stress intensity factors at the tip of both the artificial fracture and the inclusion were achieved, and initiation of the fracture was predicted. Furthermore, to validate the theoretical model, re-fracturing experiments were performed on a large-scale tri-axial system. The results showed that the defects reduce the intensity of the rock, which introduces the possibility that more complex fractures emerge in the reservoir. The results also showed that the fracture direction is governed by far-field stress. The obtained conclusions are helpful to better understand the mechanism of hydraulic fracturing in reservoirs.
Authors and Affiliations
Xue Shifeng
Keywords
Related Articles
- EP ID EP342001
- DOI 10.5614/j.eng.technol.sci.2016.48.2.8
- Views 106
- Downloads 0
Investigation of Electrochemical and Morphological Properties of Mixed Matrix Polysulfone-Silica Anion Exchange Membrane
Mixed matrix anion exchange membranes (AEMs) were synthesized using dry-wet phase inversion. The casting solutions were prepared by dispersing finely ground anion-exchange resin particles in N,N-dimethylacetamide (DMAc)...
Recent Development of the Empirical Basis for Prediction of Vortex Induced Vibrations
This paper describes the research activity related to VIV that has taken place at NTNU and MARINTEK in Trondheim during the last years. The overall aim of the work has been increased understanding of the VIV phenomenon a...
An Analysis of the Effect of the Implementation of an Integrated Management System (IMS) on Work Ergonomics in an O&M Power Plant Company
Ergonomics has developed significantly for the prevention of related accidents. Its implementation, however, depends on the existing management system within a company. The integrated management system (IMS) is frequentl...
Computational Fluid Dynamics (CFD) Simulation and Comparison for Different Numbers of Baffles to Reduce Concentration Polarization Effects in Membrane Tubes
This research shows the use of computational fluid dynamics (CFD) with finite volume method (FVM) to study the species diffusion and mixing characteristics in a tubular membrane filled with vertical baffles. This study e...
Tectonics and Geological Factors Controlling Cleat Development in the Barito Basin, Indonesia
Cleats are natural fractures within coal seams. This paper presents the results of regional cleat mapping and characterization in relation to coalbed methane (CBM) exploration and development in the Barito Basin, South K...