Synthesis of Carbon-Silica Nanomaterials by Carbonization of Cellulose Acetate and Polyisocyanate Copolymer
Journal Title: Фізика і хімія твердого тіла - Year 2016, Vol 17, Issue 2
Abstract
Cellulose acetate and polyisocyanate copolymer synthesized by mechanical mixing of cellulose acetate, polyisocyanate and fumed silicon dioxide in the presence of nickel chloride was carbonized in silicon dioxide template. Copolymer and silicon dioxide template were formed simultaneously. Composite structure and composition was studied with SEM and EDS. SEM showed that porous carbonaceous nanomaterial was synthesized. Formed carbon is represented by coating on silicon dioxide, layered ribbon-like and fibrous structures in template pores with size from several nm (thickness) to several microns (length). Metallic nickel crystals up to 200 nm in size were fabricated in composite pores from Nickel chloride by reduction of Ni2 with products of pyrolysis of organic compounds.
Authors and Affiliations
V. V. Goncharuk, V. M. Ogenko, L. V. Dubrovina, D. D. Kucheruk, O. V. Naboka, I. V. Dubrovin
Keywords
Related Articles
- EP ID EP255189
- DOI 10.15330/pcss.17.2.241-246
- Views 54
- Downloads 0
Physico-Chemical Investigation of the Pb-Te-O System
In present work, the physico-chemical analysis of the interaction process for PbO and TeO2 has been carried out. The ternary compound PbTeO3 was obtained by solid-phase reaction; this compound was identified by X-ray dif...
Calculations of the Thermal Conductivity of Si1-xGex Films with Nonuniform Composition
SiGe films have attracted much attention recently due to experimental demonstrations of improved thermoelectric properties over those of the corresponding bulk material. However, despite this increasing attention, availa...
Chemical Ordering in Ni66,7 In33,3 Liquid Alloy
Short range order structure of liquid Ni66,7 In33,3 alloy has been studied by means of X-ray diffraction method at temperatures 1235; 1260 and 1335 K. Experimental structure factors and radial atomic distribution functio...
Розробка композиційних порошкових матеріалів електротехнічного призначення
Робота присвячена розробці порошкових магнітно-м’яких матеріалів на основі композиційних залізних порошків для роботи в постійних та змінних полях промислової частоти. На основі результатів досліджень обґрунтовано і експ...
Problem of Selection and Properties of Lubricants for Ethelene High-Pressure Compressors. 5. Сompatibility of Oils with Polyethylene
Technology of obtaining and properties of ethylene compositions with different content of oils inside is researched. It is shown viscous-mechanical properties of polyethylene during addition of different quantity of lubr...