Synthesis of the PID Algorithm for Control the Thermal Regime in the 3D Printer
Journal Title: ANALELE UNIVERSITATII DIN CRAIOVA - Seria Inginerie electrica - Year 2017, Vol 41, Issue 41
Abstract
In this paper it is described the automatic system for formation the small pieces from polymer, based on the principle of thermoplastic extrusion and it is proposed the graph – analytical algorithm for identification the mathematical model of the control object first and second order inertia of the industrial process by the experimental curve of the transient process as response at the step signal applied to the entrance of the system.The procedure of calculation the approximation of the control object is based on the experimental curve of the process for which the output level is determined at the value of 0.632k and the respectively time. As control object is used the thermal stabilization regime in the extruder of 3D printer. The obtained results of identification are compared with results obtained in case of identification in MATLAB. For the obtained identified models was synthesized the PID control algorithm by the analytical methods and auto-tuning regime.
Authors and Affiliations
Irina Cojuhari, Bartolomeu Izvoreanu, Ion Fiodorov, Dumitru Moraru, Sorin Botnaru
Keywords
Related Articles
- EP ID EP264081
- DOI -
- Views 212
- Downloads 0
Analysis of Losses in Brushless Direct Current Motors and Their Influence upon Operation Characteristics
Researches regarding the optimum design and construction of brushless direct current motors are very present, owing to their use in small-dimension vehicles (electrical scooter, electrical bicycle, motor-scooters, electr...
The Synchronous Fundamental dq Frame Theory Application for the Active Filtering
One of the methods that have been used for the analysis of three phase systems is the rotating fundamental dq frame. Although it was especially used for the analysis of three phase machines, because it is a time...
Coupled Magneto-Thermal Model for an Encapsulated Busbars System Using QuickField
In this paper, we propose an approach for the magnetic and thermal modeling of an encapsulated busbars system, in three-phase execution, for high voltage using QuickField software. The paper proposes a numerical...
Computing of Phase Shift for Coupled Oscillators through a Two-Port Passive Network
Voltage controlled microwave oscillators are used in digital communication systems. Pairs of coupled and synchronized voltage controlled oscillators are used to control the phase in microwave antenna arrays as a...
Modeling Three-Phase Short-Circuits for Radial Distribution Systems
Monitoring radial distribution systems in shortcircuit conditions represents a quite important issue of electric power networks supplied by renewable sources. The method presented in the paper aims to establish in labora...