Technical and Economic Evaluation of Rice Harvesting Methods in Shirvan-Chrdavol Region
Journal Title: Journal of Agricultural Machinery - Year 2014, Vol 4, Issue 2
Abstract
Rice is a main food for Iranian people and has an important role in providing food security. Regarding the population growth, increase of rice production and reduction of losses have special importance in prevention of rice import. Rice losses in the harvest stage are the highest through the whole production period of this crop and hence the reduction of these losses is necessary. Provision of this purpose depends on on-time harvesting and separation of grains from chaff with the least grain losses, and choosing a suitable harvesting method. The choice of harvesting method depends on various factors in each region; thus, different harvest methods in each region must be compared while conducted in the same conditions. In order to recommend the beast harvest method in Shivan-Chardavol region, three harvesting methods (manually, rice-specific combine harvester and conventional cereals combine harvester) were considered as three experimental treatments and four different parts of this region considered as experimental blocks. The experimental design was randomized complete block design. This study was carried out on Anbarboo variety and the measured factors were: effective farm capacity, percent of total losses, percent of harvesting losses, number of workers and harvesting cost. The results of this study indicated that the total difference of factors was significant at the 1% error level among all treatments. The effective farm capacity in harvesting by cereals combine harvester was more than other treatments. The lowest percent of loss was observed for harvesting by rice-specific combine harvester (2.32%) and the highest percent of loss was obtained for cereals combine harvester (3.816%). The manual harvesting method had the highest harvesting cost and the lowest cost was found to be associated with the rice specific combine harvester. Therefore, from the results of this study, the use of this combine harvester is recommended for rice harvesting in this region.
Authors and Affiliations
M. H. Rahmati,Gh. A. Sohrabvandi,M. Khodadadi,A. M. Razdari,
Keywords
Related Articles
- EP ID EP717729
- DOI -
- Views 39
- Downloads 0
Investigation of Specific Heat and Thermal Conductivity of Rasa Grape (Vitis Vinifera L.) as a Function of Moisture Content
Kurdistan Rasa grape is one of the delicious and sweet fruits with black color. It contains vitamins E, C and some protectors such as antioxidants. In order to design equipments and facilities for drying, preservation an...
Feasibility of Drone Imagery for Monitoring Performance of a Modified Drill in a Conservation Farming System
In this paper, performance of a no-till corn planter in a soil covered with previous wheat residue was evaluated. Three levels of crop residue cover (CRC): 30, 45 and 60%, two planting schemes; on-bed and in-furrow and t...
Appraisal of Fine Distribution in a Pilot-scale Silo in Different Filling Conditions
Introduction During filling a silo, granular material containing a range of particle sizes, the fine material accumulates under the filling point. The inclined surface of stationary bed particle which is formed in silos...
Presentation of a Modified Boustrophedon Decomposition Algorithm for Optimal Configuration of Flat Fields to use in Path Planning Systems of Agricultural Vehicles
Introduction The demand of pre-determined optimal coverage paths in agricultural environments have been increased due to the growing application of field robots and autonomous field machines. Also coverage path planning...
Introducing a Strategy for Selection of Plowing Systems Using Hybrid SWOT-AHP Method (Khodabandeh, Zanjan)
For improvement or change in a plowing system, it is crucial that all important parameters to be taken in account. Recommendation of a tillage system should receive supports from research data as well as from skilled far...