TECHNOLOGICAL ASPECT OF BRICK PRODUCTION USING THE METHOD OF AUTOCLAVING
Journal Title: Structure and Environment - Year 2018, Vol 0, Issue 3
Abstract
Production of sand-lime bricks using the autoclaving method is a well-known process, especially in Europe. During the autoclaving process, also called the hydrothermal treatment or hardening the materials with lime and/or cement binder, a series of microstructural changes occur. Primarily, hydrated silicates of lime are created, which are responsible for physical-mechanical features of aerated materials. The article aims at characterizing the process of brick production using the method of autoclaving and estimation of their microstructural properties.
Authors and Affiliations
Paulina Kostrzewa, ANNA STĘPIEŃ, KATARZYNA DZIADEK, ARTUR SZMIDT
Keywords
Related Articles
- EP ID EP526488
- DOI 10.30540/sae-2018-024
- Views 79
- Downloads 0
THE ISSUE OF TRANSIENCE IN ARCHITECTURE AND THE PROBLEMS OF CONSERVATION PROTECTION IN THE SELECTED MODERNIST BUILDINGS
The issue of permanence and transience in architecture has intrigued both the theorists and the practitioners dealing with the creation of buildings since antiquity. We construct buildings assuming their durability and l...
FREEZE-THAW RESISTANCE OF AIR-ENTRAINED HIGH STRENGTH CONCRETE
The paper presents the programme of research aimed at fi a recipe for high strength self-compacting and freeze-thaw resistant concrete. The programme included batching fi concrete mixtures with varied W/B ratios (0.28-0....
MICROCLIMATE IN ROOMS HEATED BY TILED FIREPLACE WITH THE FUNCTION OF ACCUMULATION OF HEAT
The article presents the analysis of microclimate in rooms equipped with tiled fireplace with the function of accumulation of heat. Two research series, conducted in used premises, were presented.
IMPACT OF ADDED CHALCEDONITE POWDER ON SELECTED CONCRETE PROPERTIES
This article is about laboratory tests of concretes with 0%, 10%, 20% of the chalcedonite powder. Tested were the effect of the additions on compressive strength, absorbency and capillary strength of concrete. Compressio...
AN INFLUENCE OF SUPPORT WIDTH ON THE SHEAR CAPACITY OF REINFORCED CONCRETE BEAMS
This paper presents an influence of width changes of the supports used during the study of reinforced concrete beams on the value of angle θ – the angle of compressed concrete struts. This value is referred to as angle β...