AN ACCURACY ASSESSMENT OF SPOT HEIGHTS ON DIGITAL ELEVATION MODEL (DEM) DERIVED FROM ALS SURVEY: CASE STUDY OF ŁYSICA MASSIF
Journal Title: Structure and Environment - Year 2017, Vol 0, Issue 2
Abstract
The paper presents an analysis of ALS – derived DEM (created as part of ISOK project) of Łysica massif in Łysogóry range, Poland. The contour map, slope map, and cross sections of the massif were derived of DEM, and compared to reference data – an earlier cartographical elaborations, including topographical map 1:10000 and forest economical map 1:5000, and to field survey, conducted in 2016 sep. using GNSS and differential leveling methods. A high accuracy of DEM was confirmed, corresponding to requirements of ISOK project. The surveys revealed, that real elevations of the tops of Łysica massif vary from the values shown on topographical map 1:10000. According to precise GNSS and leveling surveys, the main top is higher by 1.2 m (GNSS measurement 613.4 m a.s.l., DEM measurement 613.14 m a.s.l.), and the eastern top, named Skała Agaty, being higher by 5 m (GNSS measurement 613.7 m.a.s.l., DEM measurement 613.4 m a.s.l.), and this top is actual highest point of Łysica massif and thus Świętokrzyskie mountains.
Authors and Affiliations
Maciej Hajdukiewicz, Ihor Romanyshyn
Keywords
Related Articles
- EP ID EP245289
- DOI -
- Views 109
- Downloads 0
EFFECTS OF SINGLE-LAYER TRUSS DOME GEOMETRY ON CRITICAL LOAD CAPACITY
The purpose of this article is to estimate the effect of geometric imperfections on critical loads. Special attention was paid to trusses subjected to large displacement gradients and vulnerable to stability loss due to...
RELIABILITY ANALYSIS OF THE SUPPORTING STRUCTURE SUBJECTED TO THE ACTION FORCED VIBRATIONS
The study concerns the forced vibrations analysis of supporting structure in terms of probabilism. Structural design parameters are defined as the deterministic values and random variables. Random variables are not corre...
THE INFLUENCE OF VISCOSITY MODIFYING ADMIXTURE ON THE SHRINKAGE OF PLASTERING MORTARS
This paper presents the influence of viscosity modifying admixture on the shrinkage size of plastering mortars. The composition of cement and cement-lime mortars has been modified by the use of cellulose ethers polymer a...
ANALYSIS OF RESPIRATORY QUOTIENT RQ IN PROCESS OF BIOMASS DECOMPOSITION IN THE LAB TECHNICS
Biomass biodegradation under aerobic condition was investigated. The source of the biomass was potato samples. The oxygen consumption and carbon dioxide rates were monitored over 24 hours, using a 2.5 L Oxymax ER-10 resp...
IMPROVING OF BOILER EFFICIENCY BY CONTROLLING THE HARMFUL SUBSTANCES CONCENTRATION IN THE COMBUSTION PRODUCTS
Chemical carbon level control is considered to be one of the simplest, cheapest and the most effective methods of optimizing fuel combustion. Standardized balance boiler’s tests show that maximum efficiency can be mentio...