TECHNOLOGICAL MOISTURE AS A CAUSE OF MOULDS ON BUILDING PARTITIONS
Journal Title: Civil and Environmental Engineering Reports - Year 2018, Vol 2, Issue 28
Abstract
The intense pace of construction work means that technical materials contain so-called technological moisture, which enables the development of biodeteriogenic organisms on building partitions. This article presents the mycological analysis of two buildings in Zielona Góra, whose building partitions were affected by colour deposits. In the first building (a block of flats in the shell and core condition) 7 species of moulds were determined, of which the dominant one was Cladosporium herbarum. In the second building (public utilities building) changes on the walls appeared just after refurbishment and were caused by a species of mould called Strachybotrys chartarum which is hazardous to human and animal life.<br/><br/>
Authors and Affiliations
Marlena PIONTEK, Katarzyna ŁUSZCZYŃSKA, Hanna LECHÓW
Keywords
Related Articles
- EP ID EP376423
- DOI 10.2478/ceer-2018-0020
- Views 62
- Downloads 0
THE EVALUATION OF THE FERTILIZING AND YIELD POTENTIAL OF STRAW AND CELLULOSE MANURE
The objective of the study was to determine the physicochemical properties as well as the fertilizing and crop-yielding value of straw and cellulose manure after a 6-month storage period. Before field application pH valu...
TRIMBLE M3 1” AND SOUTH NTS-362R TOTAL STATION ANGLE MEASUREMENT ACCURACY ANALYSIS
The main purpose of this study was to obtain information about the actual precision of angle measurements with two instruments (Trimble M3 1 "and South NTS-362R), realizable in given measurement conditions. This object i...
A CONSISTENT AYRTON-PERRY APPROACH FOR THE FLEXURAL-TORSIONAL BUCKLING RESISTANCE EVALUATION OF STEEL I-SECTION MEMBERS
Steel I-section members subjected to compression a monoaxial bending about the major axis are dealt with in this paper. The current Eurocode’s design procedure of such members is based on a set of two interpolation equat...
TRI-AXIAL TESTS FOR BRITTLE MATERIALS: MOTIVATION, TECHNIQUE, RESULTS
The aim of the paper is to explain the experimental technique used in tri-axial material tests and to supply new and more general experimental data on deformability and fracture of ceramics and cementitious composites. S...
Dewaterability of thermal conditioned sewage sludge after anaerobic stabilization
Thermal pretreatment of sewage sludge influences the improvement of biochemical decomposition of sludge in the anaerobic stabilization process. At the same time the ratio of fermentation impacts on the effectiveness of s...