Temperature Dependence Estimation of the Vibration and Frequency Sensor Resonator Mechanical State
Journal Title: Energy Engineering and Control Systems - Year 2018, Vol 4, Issue 1
Abstract
The complex of technological and metrological researches concerning development of filamentous monocrystals application and fixing methods on various materials of substrate (elastic elements) is considered. The ways of uncontrolled distortions avoiding of the initial monocrystal defect-free structure that can occur at the nodes of its mounting and reduce the Q-value of the resonator oscillations, which is the main characteristic of the tensotransducer quality, is shown. With this the monocrystal mechanical state should correspond to the stress at which its heating from the electric power supply current would not cause a noticeable monocrystal compression. The temperature dependence of deformation of a monocrystal resonator, which is a sensitive element of a vibration and frequency sensor in the operation temperature range, is studied. The factors that determine the temperature dependent deformation component of the resonant tensotransducer made of the semiconductor monocrystal are analyzed. The directions of vibration and frequency sensors characteristics optimization are indicated by purposeful control of the monocrystal deformation initial level, which is achieved by the choice of appropriate structural materials, as well as technological methods of their production.
Authors and Affiliations
Roman Baitsar
Keywords
Related Articles
- EP ID EP308036
- DOI 10.23939/jeecs2018.01.045
- Views 61
- Downloads 0
Calculation of Expansibility Factor of Gas at Its Flow Through an Orifice Plate with Flange Pressure Tappings
The values of expansibility factor of gas were defined more accurately based on the values obtained by Seidl in CEESI using the equation of mass flowrate and on the basis of experimental data (differential pressure acros...
Modeling of Hydraulic Load of Electric Drive in Electrical Complex of Pumping Station
The paper analyses the contemporary state of the electric drive hydraulic load modelling in the pumping stations’ electrotechnical complex applications. It was found that in the vast majority of cases, mathematical model...
Simulation of Dynamic Processes of Gas Flow in Collector Systems
By using CFD-simulation, plug length simulation of local resistance type plugged tee, which changes the flow direction, using equations of hydrodynamics was carried out. During simulation, velocity of medium in the threa...
Improvement of 6/10 kV Distribution Power Networks Efficiency
The study focuses on the ways to improve the operation efficiency of 6 kV and 10 kV distribution power networks on the example of the Horodok District Power Network, Lvivoblenergo PJSC (Ukraine). The main drawbacks of th...
Construction of Empirical Models of Complex Oscillation Processes with Non-Multiple Frequencies Based on the Principles of Genetic Algorithms
A method for constructing the empirical models of complex processes has been developed on the basis of genetic algorithms which, compared to the inductive method of self-organization of models, significantly reduces comp...