Temperature Dependence of Initial Permeability of NixCo1-xFe2O4 Ferrite System
Journal Title: Фізика і хімія твердого тіла - Year 2015, Vol 16, Issue 4
Abstract
The aim of this work was to create and study of ferrite nickel-cobalt powders, using sol-gel technology with participation of auto-combustion. Dependence of the initial permeability from the degree of substitution of cobalt cations on nickel cations is obtained. It is revealed that the crystallite size has a significant influence on the magnetic properties of the samples. With decreasing of crystallite size of nickel-cobalt ferrite Curie temperature decreases. It is shown that the smaller the particle size, the greater the thickness of the surface layer with significant violations of magnetic structure.
Authors and Affiliations
V. S. Bushkova, A. V. Kopayev, N. I. Bushkov, B. V. Karpyk Karpyk, O. M. Matkivsky
Morphological and Structural Characteristics of the Iron Fluoride Preparated by Solvotermal Synthesis
In this communication we demonstrate the fast and facile preparation of nanoparticles hydrated and anhydrous iron trifluoride by solvotermal synthesis using the surface active substances. The iron fluoride/acytelen black...
Laser Illumination Influence on the Optical Characteristics of As40S60-xSex (0 ≤ x ≤ 15) Films
The results of investigation of the As40S60-xSex amorphous films transmission spectra depending on thickness, exposure and heat treatment conditions are given. It was established that the increase of Se content in films...
Effect of Solid-Phase Transformations on Plasticity Steels
Plasticity steels as dependence on concentration alloying element is researched. By example of researching ultimate strength (σ0,2) iron-carbon and iron-chrome steels is shown, that plasticity of metals depend on the sol...
Effect of the Substitution of S for Se on the Optical Absorption Spectra of the Glassy Alloys Ag1.6Ga1.6Ge31.2S61.6-xSex
Optical absorption spectra of the glassy alloys Ag<sub>1.6</sub>Ga<sub>1.6</sub>Ge<sub>31.2</sub>S<sub>61.6-x</sub>Se<sub>x</sub> in the range of 400-1000 nm at 80 and 300 K have been investigated. It was revealed that w...
Correlation Between Aftereffects for Roughness of Surfaces of Metal Counterface and Carbon-Plastics
Regularities of change of isotropic roughness surfaces of steel 45 in friction and wear in a pair with polymer composite has been researched. It has been detected that the topography of the conjugated metal surface with...