Temperature solidification preparations from polymeric composite materials at the microwave oven heating
Journal Title: Інформаційні системи, механіка та керування - Year 2015, Vol 0, Issue 13
Abstract
The analysis of prospects of development space-rocket hardware technicians speaks about increase in a share of polymeric composite materials in designs of flying machines. But their manufacture is connected with certain expenses of energy. And it puts forward a problem of working out of new technologies of reception of products from polymeric composite materials on time reduction solidification polymeric binding without decrease in quality polymeric composite materials. Wide application space-rocket hardware technicians have found fibreglasses in products on a basis epoxy binding and fibrous filler (fabrics, fibres, plaits). For experimental working off of technological process solidification polymeric composite materials on samples the microwave, as a source of electromagnetic radiation of ultrahigh frequency has been chosen. Researches spent at different values of capacity on an exit of a microwave and heating time. Influence electromagnetic field the microwave oven on process solidification thermosetting polymers leads to creation of more sewed and more ordered structures that promotes increase of physicomechanical properties of a material. Studying of structural changes in polymers spent a method X-ray. In work supervised volume shrinkage hydrostatic weighing binding by a method. The received results have allowed to choose the optimal mode solidification binding under the influence of electromagnetic field the microwave oven whom the microwave oven to temperature 130°С in a current of 14 minutes with the subsequent free cooling in the furnace to temperature 60° and after that - consists in heating electromagnetic field at the open furnace - cooling to room temperature. This mode provides fuller solidification compositions (degree solidification - 97,5 %) after comparison with convection a method.
Authors and Affiliations
Ольга Петровна Роменская,, Тамара Антоновна Манько
Keywords
Related Articles
- EP ID EP540855
- DOI -
- Views 67
- Downloads 0
Influence of interference of the wing and fuselage on aerodynamic characteristics
In this paper, a change in the aerodynamic characteristics of the aircraft layout with a wing and a fuselage depending on the position of the fuselage relative to the wing is studied. A simulation of the flow of calcula...
QUANTUM CRYPTOGRAPHY: PRINCIPLES, PROBLEMS, AND PROSPECTS
Quantum cryptography is a relatively new but promising method for secure data transmission. Today it is believed that it can ensure the absolute secrecy of data, resulting from the principles of quantum physics, on which...
Stress-deformed state of composite shells with filler
This paper presents a methodology for calculating of composite layered shells with a rigid filler, which is based on the variational-grid approach for the formation of the required functionals with subsequent minimizatio...
Sensitivity analysis of shuhart control charts
The article is devoted to the analysis of the Shewhart control charts sensitivity for quantitative data depended on the number of sample values, on the basis of which the current values and are calculated, and depends o...
INFORMATION SYSTEMS IN AVIATION AND ROCKETRY
The "information economy" characterized by one single information space, based on the information infrastructure will dominate in the information society. Due to the inherent globality of space and aviation systems, the...