Temperature stability of ultra low voltage signals multiplier
Journal Title: Вісник НТУУ КПІ. Серія Радіотехніка, Радіоапаратобудування - Year 2017, Vol 0, Issue 69
Abstract
The paper considers the thermal stability of ultra low voltage signals multipliers that form the basis of discrete-analog programmable filter-correlators. These correlators perform convolution vector of the input signal samples and a sequence of weighting coefficients impulse function. These coefficients take two values: +1 or -1. The multiplier is based on a MOS transistor. The first factor appears voltage signal sampling, which is stored on the gate of the transistor, and the second is determined by the location where the current of the transistor will be sent, which is the result of multiplying. In this case, the weighting factor is one that will be sent to the current summing bus "positive" current, and the pulse rate function determines -1 multiplier connection summing bus "negative" current. The final result of multiplication of vectors is generated by subtracting the output signals weighted summation of tires. Alternatively this conversion can be output currents to two outer transducers voltage differential signal current and formation voltage as an output voltage. Since the MOSFET current is subject to temperature dependence, this factor affects the accuracy of multiplication. Analysis of this relationship and the possibility of its weakening presented in this paper. In particular, the strategy of linear and non-linear approximation to the thermostable point is proposed. An analytical relationship is obtained for the necessary conditions for temperature stabilization. For the non-linear approximation strategy, a circuit with a nonlinear element-a bipolar transistor-is proposed. Experimental results of improving the temperature stabilization for both strategies are obtained.
Authors and Affiliations
L. Pavlov, D. Lebedev
Keywords
Related Articles
- EP ID EP308228
- DOI 10.20535/RADAP.2017.69.49-55
- Views 73
- Downloads 0
The Analysis of Periodic Signal Detection Method Based on Duffing System Chaotic Dynamics
This article presents the analysis of periodic signal detection method based on Duffing system sensitivity to weak influences. The described signal detection method is developed with using of Duffing system that oscilla...
The reliability parameters definition in radioelectronic devices automated designing systems
The reliability parameters calculating problems for radioelectronic devices determined by thermal modes are considered. It is shown that such calculations should be based on temperature definition methods for separate co...
Technical approach to optimal utilization of telecommunication system bandwidth
At the present time, the opportuneness of commercial operations requires the convergence of different types of traffic and the ensuring of the necessary quality of services related to the transmission of data, voice and...
Evaluation of efficiency of the fault-tolerant systems with reconfiguration of the core of majority structure
Models of fault-tolerant system with a combined structural redundancy, which includes the majority structure with N- th number of technical systems in the core and their sliding redundancy are presented. Exploitation of...
Analysis and calculation of the thermal mode of powerful lightemitting diodes
In the article were considered the questions of taken of the heat from lightemitting device and given common order of the calculation heat regime of the powerful lightemitting diodes.