The Action of the Ultrasonic Vibrations over the Diffusion Process in Gases and Liquids
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2007, Vol 30, Issue 2
Abstract
Among the new method of studying the properties of the substance and the influence over the most various physical and chemical processes, used in different industrial domains, the main place is occupied by the usage of sound and ultrasound oscillations. Of course, nowadays we consider the acceleration of the diffusion processes, the degassing of the liquids under the action of the sound field, in melt, over the crystallisation process as being very important.
Authors and Affiliations
Aurel CIUREA, Marian BORDEI
Keywords
Related Articles
- EP ID EP661054
- DOI -
- Views 67
- Downloads 0
Laser Deposition of Bronze Aluminum on Steel Support
In order to rise the wear and corrosion resistance of 0.45% C superficial steel layers, a multilayer coating was tested by injection of powder with 88.3% Cu; 9.5% Al; 2.2% Fe in melted bath by CO2 continuous wave laser....
Making Cast Piece Using Exothermic Head
In this paper presents a study about cost of part obtained with exothermal heads by replacement of classic heads. This method contributes to conduct solidification of cost pieces, because exothermal heads are forecast wi...
Some Considerations on Environmental Sand Cores with Inorganic Binder
Traditionally, complex sand cores are produced using organic binders such as phenolic and furan resins. These binders can create bad smelling fumes requiring complex and expensive ventilation equipment to fulfill environ...
Microstructural Evolution of Al 1100 Aluminum Subjected to Severe Plastic Deformation
The goal of this document is to promote a sequence of bulk-deformation processes able to produce ultrafine grain and also nanostructured wires with adequate length to be interesting for processing in metallurgical indust...
Corrosion Resistance of the Composition Materials System (Cu–Al)–Mo, Obtained by The Eb-Pvd Method
For development of new composition materials for the electric contacts, which would differ by high electric conductivity, mechanical properties, corrosive and erosion resistance in conditions of high temperature’s influe...