Behavior of Refractories in Interaction with Metallurgical Slag
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2012, Vol 35, Issue 4
Abstract
The aim of this paper is to present the studies concerning behavior of the refractory to metallurgical slag corrosion. The corrosion resistance at high temperatures using the static method on samples containing chamotte or alumina were performed. The corrosion degree of refractory plastic mass was established by corrosion determination, and the corrosion rate and macroscopic image analysis measurements. The analysis of samples subjected to macroscopic measurements showed a better behavior in terms of corrosion resistance for alumina samples.
Authors and Affiliations
Florentina POTECAŞU, Marcela MUNTEAN, Mariana IVAN
Keywords
Related Articles
- EP ID EP607728
- DOI -
- Views 61
- Downloads 0
PhysicoMechanical and Physico-Chemical Properties of Bio-Inert Composite Ceramics
Bio-inert ceramics are non-toxic, non-allergenic and non-carcinogenic materials which explain why these are frequently used as orthopedic and dental implants. Unfortunately, these are chemically inert and do not naturall...
Study of the Inclusions from the Oriented Grains Silicon Steels and their Influence on the Texture
The paper presents experimental results concerning the inhibitor phases generation by microalloying elements utilization. It was made experiments on three silicon steel charges. It was observed that the inhibitor phases...
Improving the Powerful Behavior of an Experimental Model of Savonius Turbine (S-Rotor) with Coupled Aerodynamic Additional Blades
The proposed experimental model brings an improvement in the start of turbine rotation and torque uniformity in load. Constructively, the original blades of the turbine have gap and overlay. Additional blades are placed...
Alumina Influence on the Corrosion Resistance of Composite Layers Ni-P-Al2O3
This paper aims to analyze the corrosion resistance of composite layers based on Ni-P matrix and disperse phase alumina of 10 µm size, present in amounts of 5, 10 and 20 g / L in the nickel plating bath. The influence of...
Electrochemical Deposition and Characterization of Doped Poly (3,4-Ethylene Dioxythiophene) for Potential Use as a Biosenso
In this study, conducting polymer films of poly(3,4-ethylenedioxythiophene) (PEDOT) were electrodeposited onto a platinum electrode from an aqueous micellar medium. The electroactivity of the undoped and doped PEDOT film...