The Assessing of Mechanical Characteristics of the Steel Sheets Designed for Drawing for a Five-Month-Period as an Effect of Natural Ageing
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2009, Vol 32, Issue 1
Abstract
In the paper it is presented a study run on a five-month-period regarding the changes in the mechanical characteristics due to natural ageing for a drawing steel, cold rolled, unalloyed with 0.04% C. The ageing tendency of the sheets designed for drawing is influenced by the chemical composition and the steel purity on the one hand, as well as by the structural state and on stress state. In order to determine the mechanical characteristics and the Erichsen parameter, specimens with the following dimensions were used: length l0 = 240 mm; width b0 = 20 mm; thickness h0 = 1.5 mm. The following mechanical properties were determined: the yield point Rp0.2[N/mm²], the breaking strength Rm[N/mm²], the breaking elongation [%], the Erichsen parameter IE [mm]. In order to characterize the material’s quality with the objective of creating some marks it is useful to be studied besides the conventional set of trying, other parameters, as well, such as the drawing capacity with the help of the cold-hardening coefficient n.
Authors and Affiliations
Octavian POTECAŞU, Florentina POTECAŞU, Elena DRUGESCU
Keywords
Related Articles
- EP ID EP657727
- DOI -
- Views 51
- Downloads 0
Material Balance in a Blast Furnace, when Replacing Coke with Coal Dust
The paper presents the technology for the preparation and burning of coal dust in the blast furnace, as well as the material balance, - without and with the in - of coal dust. On the basis of the comparative analysis, me...
Electrodeposition and Characterization of Ni-Si Nanocomposite Coatings
In this paper is presented morphological aspects and corrosion behaviour of composite coatings having nickel as metal matrix and silicon as dispersed phase obtained during electrodeposition process of nickel. Silicon mea...
Analytical Model of Forge Cutting Process with Asymmetrical Tools
In this paper is developed the theory of forge cutting process feasible with asymmetrical tools. The asymmetrical cutting process is different of the symmetrical cutting process. This type of process is necessary to real...
Structure and Corrosive Firmness of Composition Materials on the Basis of Copper and Molybdenum Got Method Electron-Beam Technology
The article describe the study of corrosive firmness of composition materials on the basis of copper, obtained by EB-PVD method. Corrosive firmness of condensates was explored by gravimetric method. The especially decrea...
Quality of Microhardness Measurement Process
The capability of microhardness measurement process was assessed by MSA - Gear Repeatability and Reproducibility method. Experimental sample materials were: annealed ferrite, semiconductor-grade copper and aluminium. The...