The Assessment of the Residual Stresses Influence on Generation of the Infringement in Shape-Complex Supporting Members
Journal Title: Strojnicky casopis - Journal of Mechanical Engineering - Year 2019, Vol 69, Issue 1
Abstract
The aim of the paper is to assess the effect of residual stresses on the damage of the slide bearer. To quantify the residual stresses, the drilling method using SINT MTS 3000 drilling machine was chosen. The tensometric rosette application areas were determined based on the analysis of the results obtained by numerical modeling using the finite element method. Experimental measurement was performed on one unused slide bearer and on the other one, which during its present operation had completed about 9.106 cycles. At the end of the paper, the analysis of the measured residual stress values in chosen locations is presented.
Authors and Affiliations
Miroslav Pástor, Peter Čarák and Imrich Gömöry
Process Parameters Optimization for Producing AA6061/TiB2 Composites by Friction Stir Processing
Friction stir processing (FSP) is solid state novel technique developed to refine microstructure and to improve the mechanical properties and be used to fabricate the aluminium alloy matrix composites. An attempt is ma...
The Assessment of the Residual Stresses Influence on Generation of the Infringement in Shape-Complex Supporting Members
The aim of the paper is to assess the effect of residual stresses on the damage of the slide bearer. To quantify the residual stresses, the drilling method using SINT MTS 3000 drilling machine was chosen. The tensometr...
Effect of Exhaust Gas Recirculation on Performance of a Diesel Engine Fueled with Waste Plastic Oil / Diesel Blends
NOx emission is one of the major sources for health issues, acid rain and global warming. Diesel engine vehicles are the major sources for NOx emissions. Hence there is a need to reduce the emissions from the engines b...
Effect of Dry Friction on Bifurcation Diagram of Furuta Pendulum
Traditionally, the Furuta pendulum was used for testing advanced control strategies on a simple nonlinear and underactuated structure. In this paper, we investigate analytically and experimentally the dynamical descrip...
Analysis of Mechanical Properties of the “Bearing” Part Based on Polished Samples
Presented work describes the use of algorithm for the computation of thermo-elastic properties of randomly reinforced composite which is based on histogram from image analysis done on ITAM, CAS. Three polished samples...