The choice of control parameters for regulating modes of operation of a switched reluctance motor
Journal Title: Вісник Національного технічного університету "ХПІ". Серія: Проблеми удосконалювання електричних машин і апаратів. Теорія і практика - Year 2018, Vol 32, Issue 1308
Abstract
The article discusses the choice of control parameters for regulating various modes of operation of a switched reluctance motor. The analysis of articles published during the 2005-2018 year a switched reluctance motors for various drives in Ukraine and abroad. The analysis showed that there is a great diversity in the choice of control parameters from different authors, and most authors do not have an analysis of transients when using selected control parameters. The author of the article in previous works used phase control for a switched reluctance motor of a mine electric locomotive with a capacity of 27 kW and a rotational speed of 1146 min-1. In order to select the optimal control parameters in this work for the specified engine, the PWM voltage was chosen as the control parameter. Transients are considered when changing the load torque in the engine mode, as well as from the engine mode to the recuperative braking mode at a constant rotation speed using the developed engine model for transients in the Simulink program of the Matlab software package. When switching from engine mode to recuperative braking, the on and off angles changed. The pulse duty rates in PWM were determined using mechanical characteristics calculated on the engine models for steady-state conditions. The results of the analysis can be used in the de-velopment of a program for the microprocessor controller.
Authors and Affiliations
L. P. Galayko
Keywords
Related Articles
- EP ID EP494216
- DOI 10.20998/2079-3944.2018.32.09
- Views 129
- Downloads 0
Research of the induction-dynamic mechanism operation characteristics
The design of the linear-drive induction-dynamic mechanism used in high-speed breakers is presented. The research mechanism consists of a coil with leads and a moving disk. The coil of the mechanism is wound with copper...
Simulation of control axial flux permanent magnet generator
This article gives analysis and comparison of control system and stabilization external characteristic of axial flux generator. A technical solution is proposed that allow to control and stabilize external characteristic...
The control algorithm DC-DC converter for the field weakening tools
In order to improve the energy efficiency of rolling stock and its characteristics are taken Various regulatory tools. In particular, improving circuit design, the transition to pulse traction motor control system, the u...
Analysis of the influence of the magnetic permeability of the steel reinforced concrete structures on the level of the geomagnetic field inside premises
It is shown that the use in the construction of standard reinforcing bars leads to a dangerous weakening of the geomagnetic field on the premises. The requirements for the magnetic permeability "weakly magnetic" structur...
Bot protection surge in power in the presence of higher harmonics
Overvoltage suppressors are protection devices used at high-voltage substations. These apparatus are main substation equipment protection against overvoltage. Overvoltage suppressor breakdown results in heavy accidents w...