THE COMPUTATION OF STIFFNESS DERIVATIVE FOR AN OGIVE IN THE HYPERSONIC FLOW
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 4
Abstract
Expression for Stiffness derivative for an Ogive is derived with the suppositions of the arc on the nose of the cone from the air is being considered as perfect gas and the viscosity being neglected, the motion is quasi-steady, and the nose deflection angle of the Ogive θ is in such a way that the M2 after the shock is > 2.5. It is seen that due to the increment in angle θ, the stiffness derivative increases linearly due the progressive increase in the plan form area of the nose shape. The results indicate that there is a 38 percent increase in the stability derivative when the flow deflection θ was enhanced in the range of 5 to 10 degrees. With the further enhancement in the flow deflection angle θ from ten degrees and above, does not yield substantial increase in the stability derivative. Due to this change in the surface pressure distribution will lead to shift the location of centre of pressure, from the hinged position h = 0.5 to 0.8. The centre of pressure also has shifted towards the downstream, which lies in the range from h = 0.72 to 0.85.
Authors and Affiliations
AYSHA SHABANA . , RENITA SHARON MONIS . , ASHA CRASTA . , KHAN S. A
Keywords
Related Articles
- EP ID EP430435
- DOI 10.24247/ijmperdoct201821
- Views 78
- Downloads 0
CONTACT STRESS ANALYSIS & OPTIMIZATION OF SPUR GEAR BY FINITE ELEMENT ANALYSIS
The gears are the most common means to transmit the power. Spur Gears are used in many machine tools to transmit the power like Lathe machines, Drilling Machines etc. Since the Spur gears are subjected to high loads in s...
Immobilized PAni-TiO2 Nano-Photocatalyst Modeling for Photocatalytic Degradation of 1, 2-Dichloroethane using Response Surface Methodology (RSM) and Artificial Neural Network (ANN)
Heterogeneous photocatalytic degradation as an advanced oxidation process (AOP) is a complicated process, because many independent influential parameters can affect degradation efficiency as the response of the system. T...
Tip Leakage Effects on Flow Field of a Centrifugal Compressor
Tip leakage effects on the flow field of a low speed centrifugal compressor is observed computationally using structured multi block grid with fine grid in the tip leakage region. The computational study of centrifugal c...
Design and Fabrication of Black Box Ejection System for a Civil Transport Aircraft
Flight data recorder (FDR) and Cockpit voice recorder (CVR) are very important and play vital role in the investigation of the flight accidents. These are also used to locate the aircraft crash site and the circumstances...
Lean Practices for Waste Prioritising in Machining based Product
Many organizations have dedicated to improve the efficiency of operations through waste removal and reduction as a philosophy in the lean manufacturing initiative. This paper aimed to examine the application of lean prod...