THE CONCEPTUAL APPROACH TO THE CREATION OF THE SURFACE-MODIFIED LAYERS AND PROTECTIVE COATINGS OF THE INCREASED WEAR RESISTANCE
Journal Title: Проблеми тертя та зношування - Year 2017, Vol 74, Issue
Abstract
Based on the energy model of the tribosystem and the ideas about the structure- rheological mechanisms of energy dissipation and the reduction of the tension of the surface layers in a dynamically loaded frictional contact there have been formulated a number of tribology principles of the increased durability of elements of tribosystems in small cyclic relative displacements. The directions of practical implementation of the proposed principles in the development of surface-modified layers and protective coatings were considered as well.
Authors and Affiliations
O. I. DUKHOTA
Keywords
Related Articles
- EP ID EP322401
- DOI -
- Views 50
- Downloads 0
EFFECT OF SURFACE ATOMS SEGREGATION ON PROPERTIES EUTECTIC ALLOYS OF Fe-Mn-C-B-Si DOPED Cr FOR USE ON WORK ITEMS FIRE EQUIPMENT
In work research segregation atoms friction eutectic alloys of Fe-Mn-C-B-Si alloy Cr. Coatings applied by plasma deposition using powdered alloys. Discovered segregation of atoms C, B and Si eutectic alloy surface. Appli...
FORECASTING OF THE MAXIMUM LINEAR WEAR OF CONTACT SURFACES IN EXTREME FRICTION CONDITIONS
The influence of the contact voltage on the tribotechnical properties of lithium lubrica-tions under unsteady friction conditions at the termination of the supply of lubricant to the contact zone is analyzed. The interre...
WEAR OF STEEL CHROMOSALUMINIZED 12Х18N10T IN FRICTION SLIDING UNLUBRICATED
The structure, phase and chemical composition, microhardness of the surface bands are 12Х18N10T after chromoaluminizing chromoaluminizing. It is shown that the wear resistance stali 12Х18N10T in sliding friction without...
THE MODEL OF ALUMINIUM ALLOY CLAD LAYER DESTRUCTION DURING FA-TIGUE
The use of aircraft aluminum alloys cladding as a corrosion protection technology leads to fatigue resistance decrease. This effect is due to the cyclic elasto-plastic deformation of the clad layer, in which damages in t...
REALIZING OF THE PROCESS APPROACH TO QUALITY MANAGEMENT OF WEAR RESISTANT COATINGS
A process-oriented model of technological process of wear-resistant coatings by electrocontact strengthening of sprayed coatings (ECSSC) during the recovery machine parts is proposed. Its structural description has allow...