The Control of the Lubricant Film by the Resistive Method for Scuffing
Journal Title: Tribology in Industry - Year 2015, Vol 37, Issue 3
Abstract
The existence of a continuous film of lubricant increases the electrical resistance of the contact that can provide information on the quality of contact’s lubrication. This paper presents some experimental results obtained in the control of the lubricant film presence through the resistive method, in lubricated sliding contact between a spherical roller and a cylindrical disc, with the interpretation which gives indications about the time of scuffing.
Authors and Affiliations
M. F. Vasilache , I. Muscă
Keywords
Related Articles
- EP ID EP111658
- DOI -
- Views 86
- Downloads 0
An Overview on the Tribological Behaviour of Nitro-Carburised Steels for Various Industrial Applications
The present study is focused on elucidating the wear mechanisms taking place during sliding friction of five (5) steel grades subjected to Trufftriding. For this purpose, three sliding friction experimental configuration...
Effect of Nanoadditives on the Wear Behavior of Spheroidal Graphite Cast Irons
The tribological characteristics of spheroidal graphite cast irons with and without nanosized additives are investigated. The tests are performed as in cast iron condition as well after austempering. The spheroidal graph...
Friction Behavior Produced in The Course of a Contact Enabled Between Composite Materials and Eco-Friendly Soles Prototypes Made of Elastomeric Material with Regard to Ice-Covered Surface
The subject matter of the present research constitutes a study of the technique of friction between samples and prototypes of soles made of composite materials comprising natural rubber characterized with ingredients ori...
Maximum von Mises Stress in the Sliding Contact of Coated Bodies
Competent design decisions for the optimum configuration of a coated contact require the prediction of the stress state developing in the coated body under contact load. Conventional methods of superposition of effects a...
Friction and Wear of Cr-O-N Coatings Characterized by Atomic Force Microscopy
Cr-O-N coatings with different oxygen concentration were deposited using vacuum arc plasma fluxes on steel substrates. The coatings were investigated using atomic force microscopy under ambient temperature and humidity c...