THE CORROSION OF TUBULAR FURNACES IN PLANTS. ATMOSPHERIC DISTILLATION OF CRUDE OIL AND IN VACUUM FOR FUEL OIL
Journal Title: TEHNOMUS - Year 2011, Vol 18, Issue 1
Abstract
The paper aims to investigate the corrosion of the furnace tube elements of intalatiile Atmospheric crude oil distillation and vacuum of oil. Such phenomena occur in the ceiling and accentuates intalatie distillation as we approach the staging area. Although the corrosion phenomena is not frequently met for the tubes from the furnace, it produces serious damage because when a tube reached limit corrosion in one spot it must be immediately replaced thking into accomrnt the fact that the remaining tube is in perfect condition.
Authors and Affiliations
Marius Morosanu , Ovidiu Georgescu
Keywords
Related Articles
- EP ID EP155432
- DOI -
- Views 85
- Downloads 0
THE INFLUENCE OF ENVIRONMENT TEMPERATURE VARIATION ON THE STRENGTH CHARACTERISTICS OF COMPOSITE MATERIALS TYPE “ALUCOBOND"
In this paper the authors present an analysis of the influence of temperature variation on the strength characteristics of the composite material called „ALUCOBOND”;, a material used in construction on plating exterior w...
RESEARCH ON THE CORROSION BEHAVIOR OF ZINC COATING BY MEASUREMENT OF POLARIZATION RESISTANCE
Measurement of polarization resistance of micro-alloyed zinc layers followed corrosion products characterization and corrosion behavior of the default layers analyzed. We have studied microalloyed zinc coatings with diff...
RESEARCH STUDY OF HARDNESS VALUES OBTAINED WITH DYNAMIC HARDNESS TESTER PROTOTYPE DD01
The paper submitted for publication is a comparative study of the hardness values recorded on metallic and non-metallic samples, values that been taken over with a standardized hardness tester Shimadzu HMV-2T, respective...
ASPECTS REGARDING THE QUALITY OF CAST IRON PRODUCED IN S.C.FONTUR S.A. SUCEAVA
The authors analyze the quality of produced cast iron and molded forms from SC FONTUR SA Suceava. For this purpose samples were cast from different batches of samples, from which were made tensile specimens, samples for...
CONSIDERATION OF REFLECTION COEFFICIENT AS A FUNCTION OF FREQUENCY FOR WEDGES OF DIFFERENT MATERIALS
The wedges made of foamed poly-urethane-ether could withstand large de- formations without any damage. They would show a considerable extension before breaking, but a very low stiffness made additional support of the wed...