The Design of Oxygen Concentration and Oxygen Flow Rate in Continuous Positive Airway Pressure
Journal Title: Journal of Electronics, Electromedical Engineering, and Medical Informatics - Year 2019, Vol 1, Issue 1
Abstract
Measuring oxygen concentration and measuring the flow of oxygen is a tool used to measure the percentage of oxygen content and oxygen flow rate in CPAP. This tool uses the OCS-03F sensor, with Arduino NANO processors then displayed on the 2X16 character LCD. Measuring the percentage of oxygen content and the oxygen flow rate is carried out on CPAP for 5 measurements. The research and manufacture of this module use the Pre-experimental method with the After Only Design design, which examines the "Oxygen Analyzer", which results in measurements compared to the traced tools to obtain high accuracy values. Based on the results of measurements on the CPAP tool at Dr. Soetomo Surabaya Hospital with oxygen level settings of 21%, 30%, 40%, 50% 60%, 70%, 80%, 90%, 100% while setting the oxygen measurement rate 1L/m, 2L /m, 3L/m, 4L/m, 5L/m, 6L/m, 7L//m, 8L/m, 9L/m 10L/m. Each measurement was carried out 5 times. For the measurement of oxygen levels, the biggest error value is 5% and the smallest -0,06% while for the measurement of oxygen flow rate the biggest error value is 4% and the smallest is 0%. Based on the results of the analysis of the manufacture of oxygen levels and oxygen flow rates, it can be concluded that the manufacture of oxygen concentration measuring instruments and oxygen flow rate can work well.
Authors and Affiliations
Ade Putra Yunanda, Tribowo Indrato, Liliek Soetjiatie
Keywords
Related Articles
- EP ID EP614895
- DOI 10.35882/jeeemi.v1i1.2
- Views 63
- Downloads 0
Waterbath Design equipped With Temperature Distribution Monitor (Temperature and Timer Control Parameters)
Waterbath is a device used to create a constant temperature. This tool is used to incubates in microbiology analysis. Temperature is maintained according to the desired range. The heating element is controlled by the hea...
Tissue Processor Based Programmable Logic Control
Tissue Processor Tissue Processor consists of several stages of dehydration, clearing, and paraffin infiltration. Phase dehydration to remove water content in tissues by immersion into alcohol. Clearing stage is the proc...
Portable Spirometer using Gas Pressure Sensor For FVC and FEV1 Measurement
Extreme climate change and air pollution caused by dust, smoke, vehicle exhaust gases, and industry can increase the chances of contracting various infectious diseases caused by viruses, especially respiratory infections...
Portable Pulse Oximeter
Pulse oximeter is a tool to monitor oxygen saturation in the blood (arteries) and also a person's heart rate (BPM) without having to go through blood analysis. Lack or excess of oxygen in the blood will cause illness and...
Electrosurgery Unit Monopolar Equipped with Cutting and Coagulation Function
Electrosurgery Unit is a medical device that utilizes high frequency and voltage used to cut and dry tissue during the surgical process. The purpose of making this tool is to damage certain body tissues by heating the ti...