The effect of hydrodynamic cavitation on performance of the alkaline aluminosilicate coatings for metal structures
Journal Title: Materials Science: Advanced Composite Materials - Year 2018, Vol 2, Issue 1
Abstract
Load-bearing metal structures working in atmospheric conditions are exposed to corrosion. Known-in-the art paint-and-lacquer protective coatings can provide protection of metal for rather short period of time (5…10 years). These structures can be effectively protected by more advanced coatings of new generation, namely: alkaline aluminosilicate binder-based coatings of barrier type. These binders differ from the known-in-the-art binding materials by formation in their hydration products of zeolite-like minerals and feldspathoids. The paper discusses principles laid down in formulating the binder composition in the (хК, уNa)2OAl2O3nSiO2mH2O system, target synthesis of hydration products of the binder matrix under influence of dynamic of the binder matrix in cavitation, optimal parameter order to synthesis of cavitation treatment aimed at nanostructuring of zeolite-like and hydromica phases after solidification. These coatings exhibit high corrosion resistance, high adhesion to metal substrate and durability results of restoration works that had been carried out in December 2010 of the Big Bell Tower of the Kiev Petchersk Lavra in order to protect corroded metal surfaces by applying the aluminosilicate binder-based coatings, the major constituent (binder) of which was represented by (0.72Na2O+0.28K2O)1.5Al2O3(4.56)SiO217.5H2O are discussed in details. In 2016, after 6 years of service in high humidity conditions and other aggressive exposures, the coated metal structures were examined and no sign of corrosion of metal substrate and damage of the applied coating was found.
Authors and Affiliations
Sergii GUZII, Pavel KRIVENKO
Keywords
Related Articles
- EP ID EP679025
- DOI -
- Views 180
- Downloads 0
Mechanical and structural properties of termite soil as a partial replacement to cement for different applications
This paper presents the results of the experimental and theoretical study of the mechanical and structural properties of termite soil as a partial replacement to cement for different applications, especially in the build...
The structure and properties of laser seam stepper system (LSS) welded the low alloy high strength steel DOCOL 1200M with martensitic structure
This paper will present the influence of joining process parameters on the structure and properties of overlapped welded joints of 1.8 mm DOCOL 1200M steel. The obtained welded joints were subjected to micro- and macrosc...
Machining millimeter-scale deep holes in SiCf/SiC material using femtosecond laser filamentation effect
A 3.5 mm thick SiCf/SiC material was drilled in air environment using a femtosecond laser filament effect. The surface morphology of deep micropores was observed by scanning electron microscopy and the depth and profile...
Application of Composite Materials in Engine
This paper analyzes the technical and demand problems of the current automotive and aviation engines, and introduces the applications of carbon fiber reinforced metal matrix composites and resin matrix composites in the...
Rocess Design of Fiber Reinforced Magnesium Matrix Composites
This paper chooses magnesium as the matrix of composite materials, selects carbon fi ber as reinforcement, and designs the composite scheme according to the structure and performance of Mg-based composites. The performan...