The efficiency of the differential gear to devices for controlling the speed change through a sun gear
Journal Title: Праці Одеського політехнічного університету - Year 2017, Vol 2, Issue 52
Abstract
When performing technological processes, it becomes necessary to control changes in speed in magnitude and direction. Today, special attention is paid to the method of controlling speed changes using single-stage and multistage differential gears with a closed hydraulic system. Relevant issue is the efficiency of such devices. The aim of the work is to obtain analytical and graphical dependences of the efficiency between the driving and the driven links in single-stage single-row and two-row differential gears with closed hydraulic system, when the driving link is the carrier, and the driven one is the epicycle, and vice versa. The work of a single-row and two-row differential gear was analyzed in cases where the driving link is the carrier, and the driven one is the epicycle, and vice versa. The control link of the speed change is a solar gear that can rotate when fluid is pumped in the hydraulic system, or can be stopped by a closed hydraulic system. An analytical study of the efficiency for such a transmission was performed, and its graphic dependencies on transmission parameters were obtained. Based on the obtained analytical expressions and graphical dependencies, a conclusion was made about the change in the value of the efficiency from the ratio, the speed of the control link, and its estimation from the point of view of self-braking was performed.
Authors and Affiliations
O. R. Strilets
Keywords
Related Articles
- EP ID EP319406
- DOI 10.15276/opu.2.52.2017.05
- Views 113
- Downloads 0
Development and justification of fuel efficiency for subcritical installation driven by electron accelerator
The variants of design and technological features of manufacturing of fuel assemblies for the subcritical nuclear installation “Neutron Source” controlled by an electron accelerator, with rod-type fuel elements are prese...
Surface hardening of steel parts
Development of new resource-saving and cost-effective technologies of combined hardening of steel parts with a significant reduction of the process duration is an important and urgent task. Aim: The aim of the work is to...
The algorithms for automated calculation of the furnace charge in smelting and refining metal
The production of the initial liquid metal with minimal departures from the regulated chemical composition is one of the main conditions for the production of high-quality castings with predetermined physical, mechanical...
Using software based on the Monte-Carlo method for receiving the few-group homogenized macroscopic interaction cross-section
The constant preparation issues are important for performing the few-group analysis for different states of the reactor core. Besides, the constant preparation method influences the further calculations accuracy and qual...
Influence of the conditions for the preparation and thermal destruction of ammonium tetravanadate on the composition of oxide-vanadic electro-functional materials
The work represents the investigation of the influence of technological stages of ammonium tetravanadate preparation on the final composition of vanadium oxide products. The purpose of experimental studies is to determin...