THE ENVIRONMENTAL ASSESSMENT OF MECHANICAL-BIOLOGICAL WASTE TREATMENT BY LCA METHOD
Journal Title: Structure and Environment - Year 2016, Vol 0, Issue 4
Abstract
The computer program IWM-PL for the life cycle assessment (LCA) of waste was described. The environmental impact of the mechanical-biological treatment (MBT) technology was estimated. Final report shows that the analysed MBT plant does not have negative impact on the environment.
Authors and Affiliations
Maria Żygadło, Marlena Dębicka
Keywords
Related Articles
- EP ID EP195870
- DOI -
- Views 74
- Downloads 0
IMPACT OF ADDED CHALCEDONITE POWDER ON SELECTED CONCRETE PROPERTIES
This article is about laboratory tests of concretes with 0%, 10%, 20% of the chalcedonite powder. Tested were the effect of the additions on compressive strength, absorbency and capillary strength of concrete. Compressio...
INDOOR AIR QUALITY IN COMPUTER LABS
The article presents the results of indoor air quality measurements in three university computer labs. In the spaces concerned natural ventilation system has been applied. The obtained results indicate a very low air qua...
THERMAL COMFORT IN INTELLIGENT BUILDINGS
The paper presents the issue of thermal comfort conditions with regard to intelligent buildings. First the principles of thermal comfort are discussed, namely the parameters affecting the human perception of the best ind...
REINFORCING OF HISTORICAL CEILING BEAMS IN THE SHEAR ZONE
The article discusses the issues concerning rehabilitation and strengthening of wooden beams in historical naked ceilings in their support area. The causes and effects of the damage in the wooden beams shear zones have b...
MIXED BIOMASS AS AN ALTERNATIVE ENERGY FUEL
The use of biomass as a renewable energy source is applicable in the production of electricity and heat. The main fuel is wood in the form of fragmented wood, edgings, whirlpools, wood chips, sawdust, briquettes and pell...