The Impact of Various Compression Ratio and Influence of Bio Additive With Jatropha Methyl Ester Biodiesel in DI Diesel Engine
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
The rapid depletion of petroleum fuels and their ever increasing costs have led to an intensive search for alternative fuels. Also, there was a need to reduce the consumption of diesel fuel in the developed and in the developing countries. The increasing industrialization and innovation of the world lead to a steep rise in the consumption and demand of the petroleum based fuels every year. The experimental work to evaluate the impact of various compression ratio using blends of diesel fuel with 20% concentration of Methyl Ester of Jatropha biodiesel blended with bio additive as an alternate fuel. The experiment was carried out with three different compression ratio in DI diesel engine. Biodiesel was extracted from Jatropha oil, 20% (B20) concentration with 3 ml bio additive is found to be the best blend ratio from the earlier experimental study. The biodiesel B20MEOJBA3 ml is tested with various compression ratio of 17.5, 16.5 and 15.5 respectively. The main objective is to obtain better efficiency, minimum specific fuel consumption and lesser emission using 3ml bio additive blends with biodiesel when compared with baseline diesel
Authors and Affiliations
S. SIVAGANESAN, C. DHANASEKARAN, M. CHANDRASEKARAN, A. PARTHIBAN
Keywords
Related Articles
- EP ID EP281009
- DOI 10.24247/ijmperdfeb2018119
- Views 74
- Downloads 0
Grain Refinement through Design Modification of ECAP Dies
The need for super-plasticity and high strength leads to the development of Severe Plastic Deformation (SPD) techniques. The strength of the material is directly dependent upon the grain size of the material. During the...
Properties of Self Similar Solutions of Reaction-Diffusion Systems of Quasilinear Equations
In this paper, considered a parabolic system of two quasi linear reaction-diffusion equations with the source and absorption task and the properties of self-similar solutions of a system of quasi linear reaction-diffusio...
STUDIES ON EFFECT OF WELDING PARAMETERS ON THE FRICTION STIR WELDING OF ALUMINIUM 6061-T6 BUTT WELDED JOINTS USING TAGUCHI L9 APPROACH
The two sheets of aluminum 6061-T6 alloy of size 200×150×3 (mm) are butt-welded by the friction stir welding process by varying the weld parameters such as rotational speed, tilt angle, and feed. The taguchi L9 experimen...
The Generative Design and Analysis of a Formula One Race Car Chassis
A general Formula One (F1) Racing Car chassis requires great strength to bear the damages caused due to the crash. So, our aim is to maximize the strength of the Formula One race car chassis by using Generative design so...
An Intelligent and Co-Operative Driver Support System for Vehicles in Road Environments to Enhance Public Safety
Recent technological advancements and the prosperity towards participating in them necessitate people and possessions to be mobile. Efficient systems are needed for enhancing the security in transportation systems....