The influence of arc plasma electric and laser treatment on the structure and properties of the high speed steel
Journal Title: Archiwum Odlewnictwa - Year 2009, Vol 9, Issue 3
Abstract
The examination of the structure, hardness and abrasion resistance of surface layer of high speed steel: HS 2-10-1-8, HS 6-5-2 and HS 10-2-5-8 after arc plasma and laser welding are presented in the paper. They are compared with the properties obtained after conventional hardening. Diode laser of continuous operation and GTAW (Gas Tungsten Arc Welding) method were used. As a result of concentrated energy beam treatment applied to a steels surface layer, the structures characteristic of rapid solidification / crystallization process were obtained. The treatment of the steel by arc plasma electric with a single remelted track about 7 mm width does not lead to growth of the mechanical and tribological properties of high speed steels. The growth of microhardness as well as low the coefficient Archard of the high speed steel after remelting on the surface single track about 6 mm width by diode laser using can be obtained.
Authors and Affiliations
W. Bochnowski
Keywords
Related Articles
- EP ID EP71985
- DOI -
- Views 94
- Downloads 0
The effect of casting porosities on cavitational erosion of intermetallic alloy FeAl36
The machinery and equipment elements operating in a turbulent fluid flow, are exposed to destruction as a result of the impact of the cavitation, corrosion and abrasion processes, among which are hardest to minimize the...
Application of Kaplan-Meier analysis in reliability evaluation of products cast from aluminium alloys
The article evaluates the reliability of AlSi17CuNiMg alloys using Kaplan-Meier-based technique, very popular as a survival estimation tool in medical science. The main object of survival analysis is a group (or groups)...
Ultrasonic methods for the tests of quality of casts from the alloys of aluminum
In this work we present the results of the check test of the properties of casts, made by the method of smelted models in the precise foun-dry THE ARMATURA in Lodz. Casts were made according to the new technological solu...
Assessment of the possibility of utilisation of used ceramic moulds originated from the investment casting technology
Review of wastes generated by investment casting technology and discussion on possibilities of disposal of the largest quantity waste from this technology - used ceramic mould is presented in the paper. Preliminary exami...
The Dependence of Castings Quality Produced in Clay Moulding Mixtures from the Properties of Binder Based on a Montmorillonite
Casting quality depends on many factors including the quality of the input materials, technology, material securing and last but not least, the mould into which the casting is casted. By pouring into a single-shot mould,...