The Influence of Cold Rolling on the Mechanical Characteristics for Drawing Steels
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2008, Vol 31, Issue 1
Abstract
The paper presents the changes of the mechanical and technological characteristics of steel for deep drawing, cold rolled and recrystallization heat treated. The research was conducted on samples taken from cold rolled strip, treated and rerolled after the ARCELOR MITTAL technology and, for comparison samples sampled from the steel strip before cold deforming (hot rolled) were used as blank tests. The thermal processing of the cold deformed samples, having different degrees of deformation “ε” (2.2%; 6.5%; 15.2%; 32.5%; 50.0%; 65.0%) and of the blank tests (ε = 0%) were carried out under industrial conditions in a bell furnace.
Authors and Affiliations
Octavian POTECAŞU, Florentina POTECAŞU, Petrică Alexandru, Tamara RADU
Keywords
Related Articles
- EP ID EP660908
- DOI -
- Views 73
- Downloads 0
Research Regarding the Possibility of Obtaining Nitinol by Powder Metallurgy
In the paper the obtaining of nitinol by pressing and sintering of a mixture of nickel and titanium powders is presented. The fabrication of NiTi alloys by powder metallurgy allows avoiding the usual problems related to...
Influence of Alloying Elements on Corrosion Resistance of Some Iron - Based Sintered P/M Alloys
In this paper is described the influence of alloying elements on corrosion behavior of sintered iron parts. The compacts were sintered at 1,150 °C and the sintering time was 60 minutes. After microstructural studies, the...
Sculpture, Extended Nature
The paper portrays some aspects that show how nature is implemented into the graphic values domain by confronting the physical image of the artistic subject. The article presents some rules that have marked over time the...
Analysis of Dental Alloys Characteristics (Microstructure and Corrosion Resistance) for Different Obtaining Methods
A dental alloy was studied by electro-chemical polarization method, scanning electrons microscopy (S.E.M.) and X-ray dispersive energy analysis (EDAX) equipments analyzing the influence of casting process on microstructu...
Influence of Heat Treatment Technology on the Structure and Properties of Thick Sheet Steel ASTMS14 Degree F
In this paper, based on the researches carried out a heat treatment technology can be determined which further lead to an optimum set of mechanical properties according to the technical conditions: A. Annealing (austenit...