The Influence of Different Coatings on the Graphite Degeneration in the Superficial Layer of the Iron Castings
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2014, Vol 37, Issue 2
Abstract
The main objective of this experimenal reserch is to investigate new possibilities for reducing the graphite degeneration phenomenon in the superficial layer of iron castings. For the experiment, a spheroidal graphite cast iron was poured in standard Quik-Cup moulds covered with various types of coatings. The sources of sulfur and oxygen used for coatings were based on FeS2 and Fe2O3, respectively. After applying the coatings with sulfur or oxygen sources on the inner surface of the cups and after drying them, coatings based on iron powder and carbon containing powder respectively, were applied to block sulfur or oxygen access from the mould to the liquid iron. The coatings effect was evaluated by measuring the thickness of graphite degenerated surface layer and also by graphite nodularity and graphite shape factors deplating in the surface layer of the cast samples. The experimental results show a protective effect of the coating based on iron powder against the sulfur source while the coating based on carbon containing powder exerts a protective effect against the oxygen source.
Authors and Affiliations
Denisa Elena ANCA, Elena PANCIU, Mihai CHIȘAMERA
Redesigning a Jaw Crusher Using Value Analysis, Part II
The paper presents a complete study of VALUE ANALYSIS applied concretely to a selected piece of equipment. The phases and ITERATIVE operation of the Value Analysis method are presented. Value Analysis combines both ENGIN...
Aspects Regarding the Atmosphere Pollution Monitoring
This paper presents information regarding the variation of aerosols concentration in a central area in Galati city. For a period of time of 2 years and 5 months, there have been done correlations between aerosols concent...
Granularly Unbind Materials for Casting Composite Moulds
This paper present some partial result based on this idea (of pollution prevention) the domain of making composite-casting moulds (in time of casting, solidifying, and alloy cooling). Casting process impose temporary or...
Assessment of Blast Furnace Slag Transformation into Value Added By-Products on Basis on Knowledge of Slag Characteristics
Slags are the main by-products generated during iron and crude steel production and the steel industry is committed to increasing and improving their recycling. Today the quantity of slag produced and its utilization are...
Corrosion Resistance in Neutral Saline Fog of the Composites Cu-Mo Obtained by PVD Method
The basic materials used for electrical contacts, which may be available economically, are the Cu-Mo based composites obtained by the method of electron flow at high temperatures under vacuum. Cu-Mo (12% max. Mo) composi...