THE INFLUENCE OF MECHANICAL FORCE ON THE CREATING STRENGTH OF SURFACE LAYER WITH AW/EP ADDITIVES
Journal Title: Tribologia - Year 2009, Vol 224, Issue 2
Abstract
The paper presents the results of investigation of AW/EP additive influence on the tribological characteristics greases. The influences of different quantities of active element on the durability surface layer were tested. The tribological tests were performed in the stable and increasing load of a four-ball tribosystem. The influences of the mechanical force on the change of tribological properties of modified greases were investigated. The analysis of wear scar surface was performed using SEM and EDS techniques. It was stated that the tribological properties of greases depend more on the quantity and kind of active elements in the additive than on the additive concentration. The increase persists of surface layers under the mechanical force.<br/><br/>
Authors and Affiliations
Ewa Pawelec
DETERMINATION OF MECHANISMS OF WEAR FOR ROLLING-SLIDING CONTACT IN SELECTED OPERATIONAL CONDITIONS BY MEANS OF SURFACE TOPOGRAPHY AND MES STUDIES
The paper presents the influence of selected operating factors, i.e. load, slip, and wear rate, and surface conditions. The wear mechanism between the cooperating rolling surfaces in the rolling/sliding combination varie...
THE ASSESSMENT OF TRIBOLOGICAL PROPERTIES IN ROLLING-SLIDING CONTACT IN RECIPROCATING MOTION ON A DEVICE FOR SURFACE WEAR TESTING
The paper presents wear tests of a sample made of rail steel in a reciprocating motion on an experimental apparatus for surface wear testing. Professional machines for wear tests of rolling-sliding contact, whose main ta...
WPŁYW DODATKU CuAl10Fe3Mn2 NA WYTRZYMAŁOŚĆ NA ROZCIĄGANIE I ZUŻYCIE ŚCIERNE STOPU Al-9%SiMg
Jednym z najczęściej stosowanych w produkcji przemysłowej stopów odlewniczych jest stop aluminium- -krzem (ok. 9% Si z dodatkiem Mg). Stopy Al-SiMg charakteryzują się wysoką odpornością na korozję, w stanie zmodyfikowany...
STUDY OF THE IMPACT OF INCREMENTAL TECHNOLOGY ON MECHANICAL AND TRIBOLOGICAL PROPERTIES OF BIOMATERIALS
The latest method for creating denture replenishment in CAD / CAM systems is Direct Metal Laser Sintering (DMLS) technology. With the use of DMLS, prosthodontics, implant prosthetics, and facial-cranialjaw surgery adapte...
SLIDING WPŁYW TEKSTUROWANIA POWIERZCHNI NA OPORY TARCIA UKŁADU STAL–BRĄZ W WARUNKACH SMAROWANIA
Przeprowadzono badania tribologiczne w układzie rolka-klocek. Powierzchnie klocka (wycinka pierścienia) z brązu CuSn10P o twardości 138 HB zawierały sferyczne kieszenie smarowe uzyskane metodą wygniatania. Rolki wykonano...