THE INFLUENCE OF TANGENTIAL STIFFNESS OF THE CONTACT ON FRICTION FORCE IN THE PRESENCE OF LONGITUDINAL TANGENTIAL VIBRATION
Journal Title: Tribologia - Year 2010, Vol 232, Issue 4
Abstract
The results of the numerical analysis of the contact tangential stiffness effect on the friction forces runs in the presence of longitudinal tangential contact vibrations are presented in this paper. In addition, the experimentally determined tangential stiffness characteristics of the steel-steel contact versus normal pressure for surfaces of various roughnesses are given. The numerical calculations were carried out in the Matlab-Simulink environment with the use of Dahl’s dynamic model of friction. The numerically determined runs of friction force for the contact of precisely defined tangential stiffness were compared with respective and experimentally determined runs for the contact of the same stiffness. A very good consistency of the experimental and simulation results was achieved.<br/><br/>
Authors and Affiliations
Mariusz Leus, Paweł Gutowski
Keywords
Related Articles
- EP ID EP517415
- DOI -
- Views 43
- Downloads 0
THE IMPACT OF BIODEGRADABLE CUTTING FLUID ON THE TRIBOLOGICAL PROPERTIES OF THE FRICTION PAIRS
This paper discusses the results of wear tests performed with a T-01 M tribometer for a ball-on-disc configuration in sliding contact. The tests were carried out for HS6-5-2C steel discs with and without a TiAlN coating...
APPLICATION OF ROUGH SET THEORY TO ANALYSE THE RESULTS OF EMISSION TESTS OF METAL IONS IN HIP ENDOPROSTHESIS
The aim of the study was to evaluate the usefulness of rough set theory in the analysis of endoprosthesis wear. In the article, two main parts can be distinguished: the first describes the tribological study of hip endop...
Influence of regimes electrolyte-plasma processing on phase structure, mechanical properties and wear resistance of steel 30CrMnSi
SELECTION PROCEDURE AND PERFORMANCE OF THE TECHNOLOGICAL FEATURES OF SERVICE GENERATED LAYER
The paper presents the results of research and analysis on the relationship between selected parameters of different types of machining and the machined surface conditions. Selected parameters and treatment conditions we...
SYSTEM OF VALUES CHARACTERIZED POTENTIAL AND SEPARATED WEAR PARTICLE
Two types of wear particles are distinguished: separated and potential. The research presents a system of values that gives comprehensive geometrical and physical characteristics of potential and separated wear particles...