THE INFLUENCE OF TEMPERATURE ON THE FLOW OF GREASE IN THE BOUNDARY LAYER
Journal Title: Tribologia - Year 2015, Vol 262, Issue 4
Abstract
The influence of temperature on superficial and boundary layers forming in commercial grease ŁT4-S2, in the vicinity of walls made of six different materials, i.e. two elastomeric materials (70E, 70F), two thermoplastic materials (PTFE, PU) and two metal alloys (B47, C11000), are presented in this paper. The studies were carried out by means of a rotational rheometer with a parallel plate measuring system. Curves of changes in dynamic viscosity and shear stress in the grease as a function of shear rate in the boundary layer at a temperature from -20°C to 60°C were determined.
Authors and Affiliations
Maciej PASZKOWSKI, Aleksandra WALASZCZYK
THE EFFECT OF NANOCRYSTALLINE LAYERS ON THE WEAR RESISTANCE OF GREY CAST IRON DURING FRICTION IN AN OIL-ABRASIVE MEDIUM
Friction hardening is one of the surface hardening methods with the use of highly concentrated energy sources. In the “tool-treated surface” contact area, the surface layer of a metal is heated at a very high rate to pha...
Wpływ podstawowych parametrów konstrukcyjnych na straty mocy w zazębieniu walcowej przekładni zębatej
Sprawność przekładni zębatej w znaczącym stopniu zależy od strat mocy generowanych w zazębieniach, łożyskowaniach i uszczelnieniach. Wielkość tych strat jest uzależniona od tarcia w wymienionych węzłach przekładni określ...
THE MODIFICATION OF TRANSOL 150 OIL WITH THE ADDITION OF GREASES
In this paper, investigations concern the lubrication efficiency nodes working at point concentrated contact lubricated with using four oils are presented: Transol 150 and compositions Transol 150 oil with addition 3% po...
Wpływ nowoczesnych procesów obróbki cieplno-chemicznej i ściernej na właściwości tribologiczne powierzchni
W referacie przedstawiono właściwości warstwy wierzchniej uzyskane w procesie nawęglania próżniowego i konwencjonalnego oraz po szlifowaniu ściernicami nowej generacji. Przeanalizowano właściwości użytkowe warstwy wierzc...
FRICTIONAL RESISTANCE OF POLYMER MATERIALS DURING SLIDING ON ICE
Specific properties of the water in the solid state (ice) allow sliding other solids on ice with low friction. There are some different phenomena that affect the friction during sliding polymer materials on ice. The auth...