The Influence of the Steel's Surface Quality on the Electroless Ni-P Coatings
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2015, Vol 38, Issue 1
Abstract
The method of autocatalytic reduction coating assures a precise reproduction of the coated surface. This is an advantage when the support surface has a complex geometry but also becomes a disadvantage because it requires a support without surface defects and without high roughness. Also the electroless method requires a special preparation of the support surface which should enhance its reactivity. This paper reveals the influence of different surface characteristics of the support on the quality of the coating. Metallographic analysis has been done on the surface and transversal section of Ni-P coatings of different steel surfaces.
Authors and Affiliations
Florentina POTECAȘU, Tamara RADU
Keywords
Related Articles
- EP ID EP582348
- DOI -
- Views 82
- Downloads 0
Characterisation of Niobium Carbide Coating Obtained by Chemical Vapour Deposition
The experiments conducted to obtain thin layer of carbide by the vapour chemical deposition method have followed an original path to make NbC directly in the working room thus avoiding the import of these hazardous subst...
Residual Stress and Tribology Behaviour of TiCx Coating Deposited by NPCVD Method
In this paper, thin TiCx films were coated by chemical vapour deposition method, and various duty cycles were carried out in order to observe the influence of this parameter on residual stress and tribology behaviours. T...
Elastoplastic Model for the Steel Bars under Thermal Treatments
In order to understand material behavior, during the stresses action produced by thermal effects of volume, was started from Hooke relations, whereat was added the expressions that take into account these effects. Have b...
Study of Severe Plastic Deformation by Torsion Test
High Torsion Pressure (HPT) is an advanced tool for inducing very significant grain refinement in a wide range of metals. In this research were studied parameters of severe plastic deformation using the torsion test. The...
Effect of an Oxy-Sulphide Inoculant Enhancer on Graphite Parameters in the Mould Inoculated Compacted Graphite Cast Iron
In compacted/vermicular graphite cast iron production, inoculation is applied to limit the formation of carbides, but usually this treatment also promotes nodular graphite with improved nodularity. The main objective of...