THE INFLUENCE OF THE TYPE OF BASE LIQUID OF GREASES ON FATIGUE WEAR OF MODEL FRICTION COUPLES
Journal Title: Tribologia - Year 2011, Vol 237, Issue 3
Abstract
This work presents the characteristics of fatigue wear of the surface in anti-seizure bearing of model friction couple, lubricated with greases on the base of mineral oil and synthetic liquids. The influence of the lubricants on pitting of elements working in high loaded contact has been investigated, according to standard IP 300/82. The evaluation of anti-pitting efficiency of lubricants has been also done, comparing L10 i L50, the time after which 10% and 50% of the friction couples lubricated with investigated greases are damaged. It was concluded that the highest wear resistance of friction couples is assured by the plastic grease based on deep-refined paraffin oil or its mixture with sebacic acid diester. However acid diester synthetic oil shows a significant deterioration of anti-pitting properties in the comparison with other investigated greases.<br/><br/>
Authors and Affiliations
Jadwiga Bajer
Keywords
Related Articles
- EP ID EP271508
- DOI -
- Views 69
- Downloads 0
EXPERIMENTAL INVESTIGATION OF A FOIL BEARING STRUCTURE WITH A POLYMER COATING UNDER STATIC LOADS
Gas foil bearings can operate at very high temperatures and rotational speeds. The operation under such conditions requires developing an appropriate bearing design, including the use of advanced material solutions. This...
INFLUENCE OF LUBRICANT OIL COMPONENTS ON THE CHARACTER OF FRICTION PROCESSES OCCURRING ON WC/C-COATED SURFACE
Wear and scuffing resistance of steel elements (100Cr6) coated with WC/C (a-C:H:W type) in lubricated frictional couple were investigated. Poli-a-olefin oil (PAO-8) containing 0,1–1,0% v/v AW or EP additive and 2% v/v di...
PROPERTIES OF AN ANODIC OXIDE COATING MODIFIED BY THE APPLICATION OF A POLYMER FOR A FRICTION PAIR IN RECIPROCATING MOTION
The paper represents the results of investigations conducted on a tribological test for technically dry conditions of the friction. Analysis of the stereological counter-specimen was subjected from AOC and AOC modified s...
THE POSSIBILITY OF THE APPLICATION OF BORON NITRIDE h-BN AS A COMPONENT OF IRON POROUS SINTER
The results of research on the iron sinters containing various amounts hexagonal boron nitride h-BN are presented in this paper. The tribological research was realised with KEWAT-6 and KEWAT-1 machines at the Department...
METODA DOBORU ŚRODKA SMAROWEGO DO PROCESU GŁĘBOKIEGO TŁOCZENIA BLACH STALOWYCH W PRZEMYŚLE MOTORYZACYJNYM, NOWE ROZWIĄZANIE I JEGO WERYFIKACJA
Przedstawiono wyniki badań tribologicznych środków smarowych obecnie stosowanych w firmie METALSA i zaproponowanych do stosowania przez Uniwersytet w Monterrey. Środki te wykorzystywane sa w procesie wytwarzania podwozi...