The influence of various types of adhesive on the adhesion strength between bonded HPL and furniture boards
Journal Title: Annals of WULS, Forestry and Wood Technology; Zeszyty naukowe SGGW - Year 2017, Vol 98, Issue
Abstract
The influence of various types of adhesive on the adhesion strength between bonded HPL and furniture boards. The surfaces of furniture constructive components made of medium density fiberboard or particle board are commonly bonded with laminating materials. In the bonding of furniture panels occurs internal stress in the adhesive joints and its adhesion strength is very important. Internal stress is the main reason for the occurrence of twist and even selfdisbonding of the laminating materials in exploitation conditions. In this regard, the objective of this article is to determine the adhesion strength of adhesive joints between furniture boards and high pressure laminates (HPL). The specimen details (medium density fiberboard and particle board) were bonded with 0,6mm thick thermoplastic HPL. For the realization of adhesive bonds are used the following four types of adhesives: polyvinyl acetate (PVAc), polychloroprene contact aerosol, two component urea-formaldehyde (UF) and polychloroprene liquid glue. The adhesion strength has been determined with peel-off test. The results are presented by graphics and analyzed.
Authors and Affiliations
Dimitar Angelski, Vladimir Mihailov
Keywords
Related Articles
- EP ID EP336221
- DOI -
- Views 69
- Downloads 0
Investigation of the use of impregnating formulation with propolis extract and organosilanes in wood protection – biological analyses
Investigation of the use of impregnating formulation with propolis extract and organosilanes in wood protection – biological analyses. The paper presents results of mycological tests of wood treated with a protecting for...
Impact of the veneer quality on the properties of the LVL
Impact of the veneer quality on the properties of the LVL. In the study, 13-layer LVL boards were made from pine veneers divided into 4 quality classes. The individual plates were varied in terms of veneers content of th...
Physical and mechanical properties and anatomy of breaking buckthorn wood (Frangula alnus Mill.)
Despite the prevalence of breaking buckthorn, its wood structure and properties had not been fully characterized. Within the study presented in this paper, ten stems of breaking buckthorn obtained from more than twenty-y...
The radial variation of the density of occurrence of vertical resin canals in selected coniferous species
This study determined the radial variation of the density of occurrence of vertical resin canals on the cross-section of selected coniferous species. The tests were carried out on the wood of pine (Pinus sylvestris L.),...
Research on the effect of elevated temperature on the resistance to bending spruce wood impregnated with silica containing fire retardant
Research on the effect of elevated temperature on the resistance to bending spruce wood impregnated with silica containing fire retardant. The paper presents results of the study on the effect of high temperature on the...