The Influence of Waste Water Composition on the Pumping System Corrosion
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2017, Vol 40, Issue 3
Abstract
Wastewater piping systems in urban agglomerations or industrial areas have problems with the wear and tear of equipment and water transport pipelines used. The problems are related to hydromechanics wear and corrosion due to the presence of solid particles transported with water and due to the residual chemical compounds resulting from industrial technological processes, as well as the presence of biological waste from domestic consumers. In the paper are presented the corrosive characteristics of the waste waters and a review of the effects of wear and corrosion in the case of submersible pumps is made.
Authors and Affiliations
Manuela-Cristina PERJU, Cristian SAVIN, Costică BEJINARIU, Carmen NEJNERU, Dragoş-Cristian ACHIŢEI
Keywords
Related Articles
- EP ID EP573751
- DOI -
- Views 59
- Downloads 0
Structure Characterization of Ca/Ba, Ca-FeSi Inoculated, Low Sulphur, Electric Melted, Thin Wall Grey Iron Castings
Much of the base iron in grey iron foundries is electrically melted in an acid lined induction furnace. The performance of the induction furnace allows superheating above 1500 oC, which is appropriate for thin wall casti...
Improvement of Casting Technology by Using of Exothermic Feeder Head and Simulation the Solidification Alloy
This paper presents a simulation program use of feeders exothermic and insulating plates. High quality casting is considerably improved by using solidification simulation flow and cast.
Corrosion Resistance in Neutral Saline Fog of the Composites Cu-Mo Obtained by PVD Method
The basic materials used for electrical contacts, which may be available economically, are the Cu-Mo based composites obtained by the method of electron flow at high temperatures under vacuum. Cu-Mo (12% max. Mo) composi...
Continuous Flux Thermal Treatments for Improving the Resistance at Alternate Bending of Medium to High Strength Steel Strips
The research was focused on obtaining medium to high strength steel strips for strapping heavy products by applying continuous flux thermal treatments on common grades, cheap carbon steels. For steel strapping the behavi...
Selective Recovery by Solubilization of Metals Ions of Chromium, Iron and Zinc from Electroplating Sludge to Develop Pigments for Ceramics Industry
Electroplating industries discharge large amounts of heavy metals, including chromium (Cr), iron (Fe) and zinc (Zn) ions, in the wastewater resulted from technological processes, as well as in the sludge from wastewater...