THE INVESTIGATION RESISTANCE TO WEAR THE SURFACE LAYER OF MATERIALS APPLIED ON THE ELEMENTS OF THE ENGINE OF COMBUSTION AFTER LASER TEXTURING
Journal Title: Tribologia - Year 2010, Vol 233, Issue 5
Abstract
The results of laboratory investigations were introduced in the work in the range of the measurement of the coefficient of friction and resistance on waste in the conditions of the friction of the top layer of grey cast iron applied in the production of cylindrical funnels and solid 54 SiCr6 designed to nitrogenizing, applied in the production of piston collars. The top layer of the model units of the knot tribologycal was subjected the modification, using laser micromachining ablation: laser texturing, having on the aim of the improvement her macro- and microgeometry. The laser was applied to producing regular oil microcontainers in the shape halfbowl spherical and microchannels Nd: YAG with the special system of focussing. The topography of the surface shaped on the of the traditional processing mechanical road was subjected comparative audits and modified in the result laser micromachining. The investigative method was applied in laboratory audits tribological „pin on disk” in the support about T-11. The best effects in the range of decrease of the coefficient of the friction and the enlargement of the resistance on the waste was got in the case of model associating, in which the elements of the knot laser texturing near the well-chosen parameters of laser processing in geometrical arrangement with the degree of the cover the friction were subjected 25 % approx.<br/><br/>
Authors and Affiliations
Wojciech Napadłek, Czesław Pakowski
Keywords
Related Articles
- EP ID EP516878
- DOI -
- Views 70
- Downloads 0
Mikrostruktura i skład chemiczny warstw granicznych, powstających z udziałem biokomponentów otrzymanych z odpadów porafinacyjnych oleju rzepakowego
MECHANIZM ZUŻYCIA TRIBOLOGICZNEGO W ASPEKCIE ZMIAN W WARSTWIE WIERZCHNIEJ ROBOCZYCH WALCÓW HUTNICZYCH PO EKSPLOATACJI
W pracy scharakteryzowano mechanizmy zużycia roboczych walców hutniczych w walcowniach gorących produktów oraz półproduktów stalowych. Zaprezentowano wyniki badań warstwy przypowierzchniowej w próbkach pobranych z siedem...
MODELOWANIE I EKSPERYMENTALNA WERYFIKACJA TESTÓW NANOINDENTACJI DLA UKŁADÓW POWŁOKA– –PODŁOŻE
Metoda instrumentalnej indentacji jest powszechnie stosowana do badania właściwości mechanicznych cienkich powłok i warstw wierzchnich. Wciąż jednak wyniki testów nanoindentacyjnych są trudne do interpretacji zwłaszcza d...
THE EFFECT OF THE OIL MODIFICATION BY NANOPARTICLES OF COPPER ON ITS LUBRICATION EFFICIENCY
The paper presents the effect of nanoparticles of copper on the effectiveness of lubrication oil. Paraffin oil AP/E Core 600 was selected as the base oil. This was modified with an ingredient to form a lubricating additi...
The wear mechanism in heavy-loaded lubricated coated/steel sliding contacts
The wear mechanism of the coating/steel tribosystem compared with that for conventionally used steel/steel friction contacts under sliding conditions lubricated with base oil with various concentrations of extreme pressu...