The Investigations On Aluminium Substrates Coated With Micro-Sized WC-Co /Cr3C2-NiCr Multi-Layered Hard Coating
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 4
Abstract
The aim of this paper is to analyze the enhanced properties of aluminium substrates by coating with multilayered hard coatings. In this study, coating containing alternative filmy layers of micro-sized chrome carbide– nickel chrome (75:25) and tungsten carbide – cobalt (88:12) are coated on LM 9 aluminium substrate using high-velocity liquid fuel (HVLF) spray technique. The results indicate that multi-layered coating has shown good mechanical properties with significant improvements in the hardness and porosity with the coating strength as prescribed for use in IC engines. The mechanical properties of multilayered coating are strongly affected by number of coating layers.
Authors and Affiliations
Dr. V. Srinivas, Umachaithanya Pathem, Dr. V. S. N. Venkataramana, Kodanda Rama Rao Chebattina, Ch. V. K. N. S. N Moorthy
Keywords
Related Articles
- EP ID EP656556
- DOI 10.24247/ijmperdaug201988
- Views 100
- Downloads 0
Optimization of PID Controller Gains of an Aircraft Pitch Control System Using Particle Swarm Optimization Algorithm
In this paper, a “Proportional-Integral-Derivative” (PID) controller used in a aircraft pitch control system is optimally tuned to control the output response so as to obtain a much more stable and optimized transient re...
An Alternate Source of Energy: Hydrogen Fuel Cells
Aim of this paper is to study the use of alternate source of energy: hydrogen fuel cells. Power devices are the rising innovation and they are going to control the earth since it is an inexhaustible wellspring of vitalit...
AN EFFICIENT ENERGY AWARE LINK STABLE ROUTING PROTOCOL IN MANETS
Mobile ADHOC Networks (MANETS) are infrastructure-less wireless networks in which nodes act as both source and router. All the nodes in the ADHOC network have limited battery capacity so conservation of energy becomes an...
Mechanical Behavior of AL 7075 Reinforced with Al2O3 and SIC Nano Particles Fabricated by STIR Casting Method
Demand increases in a global range of the new brand products at national and International level. The metal matrix Nano composites are highly useful in many applications such as aerospace, automobile, military and variou...
Rationalization of Exhaust System Mounting Brackets for Buses and Trucks
Computer-aided engineering (CAE) in Product Design Cycle CAE tools are very widely used in the automotive industry. Their use has enabled the automakers to reduce product development cost and time while improving the saf...